Shift Linkage Bolt Snapped... Help
02-27-2010, 05:17 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2009
Location: BALTIMORE MD
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
Shift Linkage Bolt Snapped... Help
i made the mistake of using a snap-on 3/8 rachet on the shift linkage bolt that goes into the tranny and it snapped... any suggestion on repairing it...
THIS IS THE BOLT
THIS IS THE BOLT
02-27-2010, 07:38 PM
#2
Honda-Tech Member
Join Date: Nov 2009
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Re: Shift Linkage Bolt Snapped... Help
i say.....drill the bolt out, and then get one of those tools to remove it, and then buy the correct bolt.
look around on the hondaautomotiveparts.com website, you'll find it.
look around on the hondaautomotiveparts.com website, you'll find it.
02-27-2010, 09:53 PM
#3
Honda-Tech Member
Join Date: Feb 2010
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Re: Shift Linkage Bolt Snapped... Help
if the bolt has some sicking out still try a little heat with a visegrip and tap on it as you back it out if you drilll it plan on re-tapping the threads
02-27-2010, 09:58 PM
#4
Honda-Tech Member
Join Date: Nov 2009
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Re: Shift Linkage Bolt Snapped... Help
no, you drill a small hole in the stud, then get one of those tools that you screw into the hole, then you can unscrew the broken stud with the tool.
02-28-2010, 03:38 PM
#7
Honda-Tech Member
Join Date: Jun 2009
Location: Highland CA
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Pics PLEASE since u already posted some haha
Thread
Thread Starter
Forum
Replies
Last Post
eM1_kiD
Honda Civic / Del Sol (1992 - 2000)
4
09-29-2013 08:10 PM
