Look for ECU and ECU help
01-16-2010, 08:10 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2010
Location: Clare
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Look for ECU and ECU help
I got a 95 ECU for a honda civic EX. My Engine is a 94. would that work to gether?
my engine is a D16z6
if need more info to tell me ask plz
my engine is a D16z6
if need more info to tell me ask plz
01-16-2010, 08:54 PM
#2
Honda-Tech Member
Re: Look for ECU and ECU help
Yes. The P28 ECU will work for any D16Z6 which came on EX/Si between 92-95. If you have a 5-spd make sure the ECU is 5-spd and auto for auto. You can convert an Auto ECU to 5-spd but I can't remember how, I did it back in 2005 on a P28. If you run an Auto ECU on a Manual, you will throw a code for a Lock-up solenoid.
01-16-2010, 11:55 PM
#4
Re: Look for ECU and ECU help
yeah, it'll work perfectly. To convert from auto to 5speed you remove resistor RP 17 and RP 18 and put a jumper (piece of wire, leg off a resistor, etc) across 18.
Then you can remove on of the 5151 high side switches and use it for a VTEC conversion on other ECUs.
While you're in there you may as well chip it and solder in a header for data logging and everything. It all takes a steady hand, but it's not bad if you know what you're doing.
Then you can remove on of the 5151 high side switches and use it for a VTEC conversion on other ECUs.
While you're in there you may as well chip it and solder in a header for data logging and everything. It all takes a steady hand, but it's not bad if you know what you're doing.
Thread
Thread Starter
Forum
Replies
Last Post
slowesteg
Tech / Misc
5
02-26-2013 05:18 PM
