bearings coating - is it worth to do this ?
01-10-2010, 09:58 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2006
Location: POLAND, POLAND
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
bearings coating - is it worth to do this ?
what do you guys think about bearing coating? i'm buiding b18c sleeved by beson with micropolished crank from benson;
ipg and calico can do that, do you have any exerience with that kind of bearings?
it's 80$ for caoting
ipg and calico can do that, do you have any exerience with that kind of bearings?
it's 80$ for caoting
01-10-2010, 10:05 AM
#2
Honda-Tech Member
Join Date: Sep 2002
Location: IKEA Land
Posts: 514
Likes: 0
Received 0 Likes
on
0 Posts
Re: bearings coating - is it worth to do this ?
for a high reving high hp engine I would have done it.. Calico has good reputations over here in Sweden anyway.. But for a daily driver under 4-500hp with lets say a redline under 9000-9500 are just fine without it and money can be spent elsewere..
It is all up to for what perpose the engine is built and how it is pushed..
It is all up to for what perpose the engine is built and how it is pushed..
Thread
Thread Starter
Forum
Replies
Last Post
dhautorepair
Forced Induction
2
02-02-2012 01:48 AM
integra3586
All Motor / Naturally Aspirated
21
10-30-2009 09:16 PM
blinx9900
Honda Civic / Del Sol (1992 - 2000)
11
05-16-2007 01:52 PM
alterdcreations
All Motor / Naturally Aspirated
49
12-22-2006 07:22 AM
