obd1 confusion
10-16-2009, 04:37 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2009
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
obd1 confusion
i Have a 91 hatch with an all motor d16a6 my dizzy went up and i was given a z6 head with a dizzy on it what ecu would i have to get to b able to just put the dizzy on my d16a6 and what else do i have to do im tryin to do this as cheap as possible its susposed to be my daily drivern i know a p28 is really hard to come by
10-16-2009, 04:42 PM
#2
Keyboard Humorist
Join Date: May 2002
Location: Granada Hills, Ca, USA
Posts: 9,814
Likes: 0
Received 9 Likes
on
7 Posts
Re: obd1 confusion
PR4/P05/P06/P75 can all be upgraded with vtec hardware.
http://www.xenocron.com/combo-kit-ch...sion-p-55.html
$35 gets you the hardware to add vtec and chip the ECU.
They offer a basemap for an additional $14.
You can also contact http://www.phearable.net/ for a chip that may suit your setup a little better.
Not sure how much all this comes up to, but it seems like it's close to what a P28 runs for.
Just sold my P28 last month for under $100.
http://www.xenocron.com/combo-kit-ch...sion-p-55.html
$35 gets you the hardware to add vtec and chip the ECU.
They offer a basemap for an additional $14.
You can also contact http://www.phearable.net/ for a chip that may suit your setup a little better.
Not sure how much all this comes up to, but it seems like it's close to what a P28 runs for.
Just sold my P28 last month for under $100.
Last edited by 4drEF; 10-16-2009 at 04:49 PM.
Thread
Thread Starter
Forum
Replies
Last Post
TurbodTegra
Acura Integra
2
03-10-2011 12:46 PM
SingleCamin
Honda CRX / EF Civic (1988 - 1991)
14
03-07-2009 10:14 AM
