>>>Official JdmOdz Ek4 Build Thread!<<<
#1
>>>Official JdmOdz Ek4 Build Thread! 56kg<<<
Well, let me start off by saying they call me OdeasZzie... I'm 20yrs old and I love/cherish my vehicle. I've been in the Honda game for quite some time now, but unfortunately this is the 1st build thread I'm creating. I will be looking forward to the questions, comments, and or opinions posted on this thread. I work extremely hard for every part I purchase for this project, so sorry if a few updates may take longer than expected. I'm dedicated to working on my Ek, and I don't condone to doing half *** jobs..
As some of you may know I got rid of my 91 Honda Civic Si and decided to start a new & more sophisticated project.
The Victim:
• 1997 Honda Civic Cx
• 97xxx original miles
• Currently the 2nd owner.
• Purchased Summer of 2007.
Below is a picture taken about 7-8 months ago just to give an rough idea of how far I came along with the build.. SO BE PATIENT, STAY TUNED, & BE SURE TO SUBSCRIBE!!!!
I'm currently building it as we speak, but i can still update u guys with a few things i've
done to it so far.
P.s: Due to my financial crisis this will be a low budget build, but quality doesn't always mean spending a ton of money as I will prove. Also there will be lots of DIY products involved with this build.
(BTW THIS VEHICLE IS DAILY DRIVEN!)
IA 2011... im in there like swim wear!!!
UPDATES: Updates will be fairly frequent so stay tuned and your eyes open. Comments are more than welcomed. There will be LOTS AND LOTS OF PICSZ!!!!!!! ((50+ pics per page at minimum! guaranteed or ur money back!))
Master Index:
Pg.1
Chapter 1: The Begining..
Chapter 2: Installing D2 suspension/ Sk2 camber kit
Chapter 3: ..........
Chapter 4: Parts i had in storage
Chapter 5: Tony's Body Shop
Pg.2
Chapter 6: Starting The Body Work
*Under construction*
Chapter 1: The Beginning
The day i picked her up...
the previous owner got side swiped and the driver side rear upper control arm was damaged.... which was why the wheel is
angles like this..
I began cleaning up the bay a little..
CTR shift boot
Picked up some 00 gsr front seats. thanks to 845Wheels!
The cancer..
Replaced passenger side toe arm..
I decided to cut the springs until i have enough for my suspension..
Penetration gotta love it.
Refurbishing a few things..
Purchased & Installed smoked tail lights.
Ctr wing with led lamp.
Off with the old..
On with the new..
Before..
After..
Gross..
Picked up and installed my B&M short shifter. Thanks to Chris D. for the sweet deal
Installed..
Also installed the type r front lip.
Finally got my Oem SiR headlights from passwordjdm..
Engine bay before..
After a Lil cleaning
Last edited by JdmOdz; 03-14-2011 at 12:32 PM.
Trending Topics
#8
Re: >>>Official JdmOdz Ek4 Build Thread!<<<
Chapter: 3....................
-Driver Sir headlight destroyed
-Driver window shatters
-Front bumper cracked
-Driver fender damaged
-Windshield
-Airbags
-Driver side lower control arm bent
-Damaged hood
This surly wasn't nothing that would be able to stop and make me give up on my build, instead i seen it as a way to properly and fully refurbish my Ek hatch. So i began taking her apart immediately after the incident.
>=]
AND THEN THE UNEXPECTED HAPPENS.. A CRASH!!!!!
Some old man, paying no attention to the road while driving cuts me off at an yield sign! leaving my car in critical condition mean while his vehicle is fine and is in perfectly running shape..
But hey, at least i was safe to say no one got injured.
The damage that was inflicted on the car
Some old man, paying no attention to the road while driving cuts me off at an yield sign! leaving my car in critical condition mean while his vehicle is fine and is in perfectly running shape..
But hey, at least i was safe to say no one got injured.
The damage that was inflicted on the car
-Driver Sir headlight destroyed
-Driver window shatters
-Front bumper cracked
-Driver fender damaged
-Windshield
-Airbags
-Driver side lower control arm bent
-Damaged hood
This surly wasn't nothing that would be able to stop and make me give up on my build, instead i seen it as a way to properly and fully refurbish my Ek hatch. So i began taking her apart immediately after the incident.
>=]
Last edited by JdmOdz; 05-25-2010 at 08:58 PM.
#9
Re: >>>Official JdmOdz Ek4 Build Thread!<<<
Chapter 4: Parts i had in storage
-Gsr lower control arms
-BNIB Diver fender
-Headlights
-Steering wheel
Back to the usdm headlights
Outt!
Now off to the body shop!
-Gsr lower control arms
-BNIB Diver fender
-Headlights
-Steering wheel
Back to the usdm headlights
Outt!
Now off to the body shop!
Last edited by JdmOdz; 06-13-2010 at 11:17 AM.
#15
Honda-Tech Member
Join Date: May 2008
Location: acre
Posts: 1,051
Likes: 0
Received 0 Likes
on
0 Posts
Re: >>>Official JdmOdz Ek4 Build Thread!<<<
LOOKS COOL! just you have one bad luck with these crashes mate !!!! wish to you a better luck in the next times and keep this thread updated!
#17
Re: >>>Official JdmOdz Ek4 Build Thread!<<<
Chapter 5: Tony's Body Shop
I decided to bring the hatch to Tony's Auto body. Tony is a good friend of mine and gave me a great price to paint the complete car.
Once at the shop i began taken the car apart...
more updates shortly.....
Once at the shop i began taken the car apart...
more updates shortly.....
Last edited by JdmOdz; 05-25-2010 at 09:25 PM.
#20
Honda-Tech Member
Join Date: Jan 2009
Location: Malaysia
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
#23
Junior Member
Join Date: Sep 2006
Location: Houston, Texas, USA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Re: >>>Official JdmOdz Ek4 Build Thread!<<<
Sweet build. I have this funny feeling that I remember seeing that hatch up for sale when I was browsing Autotrader. Maybe just a coincidence.
#25
Re: >>>Official JdmOdz Ek4 Build Thread!<<<
I will have 2 sets of rims for this car. Currently i have a set of 15X7 BBS Mahle rims that im refurbishing.. im also gettng some low offset Enki 92's for a real good price, for the Enki's i will be goin with stretched tires, for a stagered wheel look. ill post pics of them as soon as i take a few.
Last edited by JdmOdz; 05-25-2010 at 09:04 PM.