Is this good enough for 450??
#1
Member
Thread Starter
Join Date: Dec 2006
Location: Lynchburg, Va, US
Posts: 1,327
Likes: 0
Received 0 Likes
on
0 Posts
Is this good enough for 450??
My About to drop my motor in im wondering if i pull the number im hoping for my setup is going to be on these injectors. I know the SC61 take me there but will i max out injectors beforehand? Thinking about picking up new injectors before my tuning date whick is the 19th Mods are
B18B Block stock sleeve 81.55mm
Polished and Balanced LS Crank
Clevite Bearings
Eagle Rods
CP 9:1 Pistons
Type R oil pump
GSR Water Pump
GSR Timing Belt
GSR Headgasket
LS Thermostat
GSR HEAD
GSR Cams
Skunk 2 Cam Gears
Supertech Valvetrain and Valves
Stock dizzy with new coil and rotor
ARP Headstuds
Rc 750cc injectors
Pfab Ramhorn
Turbosmart 38mm wastegate
Greddy Type s bov
Precision SC61
Greddy ic piping
3inch downpipe
Omnipower 4bar map
B18B Block stock sleeve 81.55mm
Polished and Balanced LS Crank
Clevite Bearings
Eagle Rods
CP 9:1 Pistons
Type R oil pump
GSR Water Pump
GSR Timing Belt
GSR Headgasket
LS Thermostat
GSR HEAD
GSR Cams
Skunk 2 Cam Gears
Supertech Valvetrain and Valves
Stock dizzy with new coil and rotor
ARP Headstuds
Rc 750cc injectors
Pfab Ramhorn
Turbosmart 38mm wastegate
Greddy Type s bov
Precision SC61
Greddy ic piping
3inch downpipe
Omnipower 4bar map
Last edited by oodie; 08-28-2009 at 09:56 PM.
Thread
Thread Starter
Forum
Replies
Last Post
93B18
Acura Integra
4
12-26-2001 11:04 PM