Question about some injectors/resistor box
#1
Question about some injectors/resistor box
So I have some 550cc injectors laying around from an old turbo PT cruiser project. Ohms across the injector is 12 ohms. I even have some connectors for them. If I can make these fit in my turbo 94 accord f22b2, would I need to remove or keep the resisistor box in the circuit?
#2
Premium Member
Re: Question about some injectors/resistor box
That would make them high impedance, so you would remove the resistor box. You also need the injector offset information to be able to tune them correctly.
#3
Thread
Thread Starter
Forum
Replies
Last Post