need help geting my A/C bolted up...HELP PLEASE!
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2010
Location: wisconsin!!!
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
need help geting my A/C bolted up...HELP PLEASE!
i have a 00 civic ex with a gsr swap. i bought a b20 a/c bracket from ebay marked "P3F" which i guess is classified as a JDM A/C bracket it did not bolt up to the gsr motor or my stock d series compressor. one or 2 holes lined up that was it. so idk what to do... please give your input. thank you
#2
Honda-Tech Member
Thread Starter
Join Date: Apr 2010
Location: wisconsin!!!
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Re: need help geting my A/C bolted up...HELP PLEASE!
im new to honda-tech too so send me a private message or ill just check back on this thread to see what everyone says
#3
Honda-Tech Member
Join Date: Aug 2006
Location: Wilmington, NC
Posts: 1,780
Likes: 0
Received 0 Likes
on
0 Posts
Re: need help geting my A/C bolted up...HELP PLEASE!
pretty sure u need both a gsr bracket and compressor. U may be able to run ur stock compressor but i dont think so. Def need to get the gsr ac bracket. Dont forget to get a new dryer and PULL A VACUUM (u can check for leaks by just holding the vacuum for a day and c if it drops) on the system then charge with the vacuum pulled. If u dont do this it may not work very well
Thread
Thread Starter
Forum
Replies
Last Post
90 Si Hatch
Honda CRX / EF Civic (1988 - 1991)
3
08-13-2011 10:12 PM
MShonda
Honda Civic / Del Sol (1992 - 2000)
7
11-22-2010 07:20 PM
extremeEK00
Honda Civic / Del Sol (1992 - 2000)
6
05-08-2010 09:00 AM