Help needed with a D16A6 regrind cam...
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2007
Location: Zagreb, Croatia
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Help needed with a D16A6 regrind cam...
Here we go, I just got back from the postal office, and got the cam. I took some pics, and I'm determined to put the cam in my engine, so I'm asking all of you for some help!
I've been told that it is a Colt cam regrind.
By the pics, can you tell me is this a regrind?
What should I do first?
Take some measurements?
In a few days, I will have a stock D16A6 cam and then I will compare them first.
Any help would be appreciated.
http://img38.imageshack.us/img38/932...akanada001.jpg
http://img38.imageshack.us/img38/241...akanada002.jpg
http://img41.imageshack.us/img41/891...akanada003.jpg
http://img41.imageshack.us/img41/725...akanada004.jpg
http://img41.imageshack.us/img41/905...akanada005.jpg
http://img41.imageshack.us/img41/662...akanada006.jpg
Also, what should be my next step, when putting it in the engine?
I don't have access to dyno tuning right now, but I would love to put it in. I do have a adjustable cam gear, and maybe combining that with a little distributor tilt and adjusting the valve clearance would do it for now, assuming it is a regrind.
I've been told that it is a Colt cam regrind.
By the pics, can you tell me is this a regrind?
What should I do first?
Take some measurements?
In a few days, I will have a stock D16A6 cam and then I will compare them first.
Any help would be appreciated.
http://img38.imageshack.us/img38/932...akanada001.jpg
http://img38.imageshack.us/img38/241...akanada002.jpg
http://img41.imageshack.us/img41/891...akanada003.jpg
http://img41.imageshack.us/img41/725...akanada004.jpg
http://img41.imageshack.us/img41/905...akanada005.jpg
http://img41.imageshack.us/img41/662...akanada006.jpg
Also, what should be my next step, when putting it in the engine?
I don't have access to dyno tuning right now, but I would love to put it in. I do have a adjustable cam gear, and maybe combining that with a little distributor tilt and adjusting the valve clearance would do it for now, assuming it is a regrind.
Thread
Thread Starter
Forum
Replies
Last Post