airhonda92

I've got a 1.2" drop f & r now and I've decided not low enough. I have ordered Skunk2 full coilovers and am going to drop 2.5 rear and 3 front. Also I will be doing the rear disc break conversion!

Anyway, does anyone know how much camber adjustement I'm going to need? The difference in cost between a +0-1.5 and a +0-3.5 balljoint is worth asking about. I think I'm going with SPCs adj kits. They are a local suspention company. Thanks!

h22 kid

just finished my rear conversion and let me tell me takes some mad time to get it done. took a total of six hours. remember get them off and then get them on.

K20A2DELSOL

my accord is dropped 1.75 in the front and 2.25 in the the rear and my camber sits at -0.8. so you'll prolly need the +0-3.5.

ktcb7

im rolling sportlines with the front cut 2 coils off. ive decided thats not low enough, in search for full coilovers than going to the lowest setting.

TheMuffinMan

iTrader: (1)

Anything in the front greater than +2 or so degrees of the anchor style camber kits will cause the control arm to hit the shock tower/inner fender

jim.e.

this man speaks the truth happens every time I hit a bump

professorman

Yes. Mine is on Eibach Sportlines and I had to beat the hell out of mine for it to stop touching.

P_Adams

At 2" you start dealing with more issues than it's worth.
Have your kidney belt handy?

91lx

It ain't about minor issues like drivability, suspension travel and the inability to conquer speed bumps.

It's all about being lower than the next guy.

And kidney belts are for old guys! 17 year olds aren't even aware they have kidneys yet.

P_Adams

A couple of days without suspension travel will remind them REAL quick! (lol)

P

airhonda92

I'm not too worried about the kidneys! I think I'm going to go with SPCs adjustable balljoint and adjustable rear arms... Anybody have any experiance with SPC?? Don't want to buy shitty equipment!

airhonda92

Thanks for the heads up, I was planning on budgeting 12 hours, I'm a freak like that! Besides I need the extra time to find the fickin TOOL I need in my mess of a garage!!!

19Accord97

SPC and Ingalls are basically the only two makers of adj. balljoints and are considered to be "top companies". I would trust either brand equally the same, but I went w/ Ingalls as I could get them a bit cheaper. So far they are holding up great! The build quality seems good and they are pretty heavy balljoints!

19Accord97

I am dropped about 2.5 inches. Roughly 1 1/2 finger gap in the front w/ 18's and 2 in the back.

Looks sexy!

airhonda92

Very nice, thanks for that info! Ebay has ingalls for $300 for a set f & r and it's about $380 for the SPCs. Buddy of mine has SPCs and loves them. Funny how both compaines are driving distance for me!

19Accord97

No problem!

Personally I have Wicked Tuning for the rear. It was only $90 and has been great.

SykVSyx

You cut your springs?

SykVSyx

I picked up the Wicked Tuning kit for the rear as well.

I have a 6th Gen sedan, haven't put the kit on yet, because I'm still on the stock rims, but once I put the summer's on, I'll probably need it as well as having the fenders rolled.

teambumspray

will i have front and back kits on stock 96 ex whells rolling on 195 55 15 tires and my header is about 1.5 inches off the ground on a good day.....I <3 speedbumps

SpoonSportsJunkie

I wouldn't to too much lower than eibach race/ h&R race for this scenereo.
Your control arms need a certain amount of suspension travel / geometry.

teambumspray

.... springs are great but the control arms still break . buy aftermarket arms and watch the road.... thats my best advice...use the fogs for something other than just bein there for looks.

tamadrummer1120

you said you just bought the skunk2 coilovers huh? well first off they are not full coilovers. they are struts and coilover sleeves on those struts. I have them. They are not bad. The coils are all the way down in the front, only gave me a one finger gap in the front.......not low enough....and the rear still has some more to go, but it has a one finger to match the front.

Here's a reference picture:



If you want to go low low, like slammed, you need full coilovers. Definitely. So be prepared to spend around a grand, more or less.

russ_cb7

i have skunk2 shorter struts with ground control coil overs...that **** is low....almost tuckin my 15s

tamadrummer1120

the skunk2 sport shocks? thats their literal name for it. I am considering hitting up some GC's so I can go lower.

russ_cb7

ya what ever they are called. i could take out one of the rings to get it down another half inch but i dont really feel like going through all that work cause im trying to sell the car