spun rod beraing
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: Sparks, NV, USA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
spun rod beraing
I had got a 1.6 sohc motor form a friend and the 3rd cylinder bearind went out. Pulled of end cap and say it had made a little metal on the crank. Is there a way i can get that off or is that a machine shop deal? Please let me know. Thanks
#3
Honda-Tech Member
Join Date: Feb 2005
Location: birmingham, alabama, us
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Re: spun rod beraing
well you can get a emry cloth if its just a hair.
but anything serious, youll need a polish at the least.
probably need a rod. and biger size bearing if the damage was to bad
but anything serious, youll need a polish at the least.
probably need a rod. and biger size bearing if the damage was to bad
Thread
Thread Starter
Forum
Replies
Last Post