Need help on headers?????
#1
Junior Member
Thread Starter
Join Date: Oct 2008
Location: Tulsa, ok, usa
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Need help on headers?????
Are all the k-series headers the same? I want to buy some headers but the buyer say it fits on a EG and EK honda i dont know if it would be a good set for my 2007 SI...Thanks alot guys.
#2
Brand New
Re: Need help on headers?????
Eg's and Ek's are completely different cars. If your seller is telling you the headers fit these cars, then you shouldn't even be considering them.
#4
Honda-Tech Member
Re: Need help on headers?????
Not all K-series headers are the same. Not trying to bust your ***** but you need a header not headers. You only need one not a set.
#5
Honda-Tech Member
Join Date: May 2007
Location: Southern Cali, Estados Unidos
Posts: 1,319
Likes: 0
Received 0 Likes
on
0 Posts
#7
Re: Need help on headers?????
Dc sports makes a nice race header if you don't mind loosing your cat, adn then having to get a O2 defouler to keep from setting teh CEL, runs about 499.00 retail. with their cat-back it dyno'd a little over 18hp.
Trending Topics
#8
Re: Need help on headers?????
dcrh is junk. the welds suck, and the flex pipe cracks. even wit the new batch that is "fixed" suck. smaller piping and a 2" collector are terrible if u want a race header. they arent stainless steel and even with their ceramic coating, it will chip away and rust. they are less than 400. nobody ever pays retail.
if u want a header similar to dcrh. go with the strup, its stainless and has a better build quality. but even then i wouldnt recommend getting either of those headers.
#9
Honda-Tech Member
Join Date: Feb 2009
Location: The hot ass desert
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help on headers?????
wow your seller is a dumbass...the EG and EK k series swap header is only made to fit on there chassis not the Si's....hes probably tryin to sell you the R-Krew header...witch once again wont fit on the Si's...i agree with K5^ you should not even bother buying stuff from him if he doesnt even know a simple thing like that
#10
Honda-Tech Member
Re: Need help on headers?????
dcrh is junk. the welds suck, and the flex pipe cracks. even wit the new batch that is "fixed" suck. smaller piping and a 2" collector are terrible if u want a race header. they arent stainless steel and even with their ceramic coating, it will chip away and rust. they are less than 400. nobody ever pays retail.
if u want a header similar to dcrh. go with the strup, its stainless and has a better build quality. but even then i wouldnt recommend getting either of those headers.
if u want a header similar to dcrh. go with the strup, its stainless and has a better build quality. but even then i wouldnt recommend getting either of those headers.
#12
Honda-Tech Member
Join Date: May 2007
Location: pasadena, md, USA
Posts: 2,112
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help on headers?????
With my experience so far my header is holding up fine. been on there for a while. And all the 2in blah blah, my car made 207 with I/DCRH/E. Header has performed for me very well and for the price....cant beat it. i payed 350 shipped.
#13
Honda-Tech Member
Join Date: Jun 2006
Location: Kaneohe, HI
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help on headers?????
here is an option if you want good header and keep a HF cat to stay legal.
http://www.procivic.com/pages-produc...a28/index.html
http://www.procivic.com/pages-produc...a4b/index.html
http://www.procivic.com/pages-produc...a28/index.html
http://www.procivic.com/pages-produc...a4b/index.html
#14
Honda-Tech Member
Re: Need help on headers?????
here is an option if you want good header and keep a HF cat to stay legal.
http://www.procivic.com/pages-produc...a28/index.html
http://www.procivic.com/pages-produc...a4b/index.html
http://www.procivic.com/pages-produc...a28/index.html
http://www.procivic.com/pages-produc...a4b/index.html
Catalytic Converter Emissions Notes: If you live in California, you CANNOT legally use this product on public roads.
Thread
Thread Starter
Forum
Replies
Last Post