help my tranny wont fit
#1
New User
Thread Starter
Join Date: Aug 2009
Location: madison, wi
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
help my tranny wont fit
i have a 91 dx hatch with a b18a1 swap, i blew my tranny out and replacing it with the YS1, ive tried for almost 6 hours twisting and turning and the damn thing wont slide in! any ideas?
#4
Honda-Tech Member
Re: help my tranny wont fit
if i had to guess i'd say your old tranny was a 90-91 version, and this new trans you have is a 92-93. the input spline is 1/32 of an inch larger on the 92-93's. this would explain why the larger input shaft of the new trans is not sliding into the smaller 90-91 clutch disc. so either get a different transmission, or purchase a new clutch.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
mike9571
Acura Integra
6
04-15-2007 10:02 AM