gsr cams, ??? vlave springs
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2008
Location: Isabela, PR, USA
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
gsr cams, ??? vlave springs
my setup is not 100% for sure, i mite be changin sum things up. but for rite now the blue print is
block
B20 block,9:1 cr, eagle rods
head
b16a2 head,gsr cams, stock valvetrain. pnp head, lookin for bout 10lbs.
?????
am i safe runnin my stock valvetrain, since im gonna be using stock cams. i jus don wanna overkill it, or shud i upgrade my springs and possibly ret. im not made of money, but my theory is, if it needs to be done, then i can save for it.
ne input? thanx
block
B20 block,9:1 cr, eagle rods
head
b16a2 head,gsr cams, stock valvetrain. pnp head, lookin for bout 10lbs.
?????
am i safe runnin my stock valvetrain, since im gonna be using stock cams. i jus don wanna overkill it, or shud i upgrade my springs and possibly ret. im not made of money, but my theory is, if it needs to be done, then i can save for it.
ne input? thanx
#2
Re: gsr cams, ??? vlave springs (Boostn B20)
i would atleast do springs and retainers they arent very expensive although you could do without them also its really up to you and how much your willing to spend
#4
Honda-Tech Member
Thread Starter
Join Date: Jul 2008
Location: Isabela, PR, USA
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
but, with stock gsr cams, do i really need them. like i said if its a must then i will, but i jus dont want to overkill. i was under the impression that high profile cams needed springs and ret, not stock?
Thread
Thread Starter
Forum
Replies
Last Post
SPOONfdEK
Acura Integra Type-R
4
01-11-2004 07:20 PM