how to bleed the cooling system
#1
Junior Member
Thread Starter
Join Date: May 2008
Location: somewhere in cali, California, U.S.A
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
how to bleed the cooling system
how to know when the cooling system has air on it? and how to bleed the cooling system? own a d16z6 engines and when i turn it on and the cap off the coolan start to go up and bubbles..and then goes down and stop the bubbles.. ...
Modified by sorullo at 9:50 PM 7/11/2008
Modified by sorullo at 9:50 PM 7/11/2008
#2
Re: how to bleed the cooling system (sorullo)
when it goes down poor mor coolant in..and have ur heat on..and try to have the engine rev but not enough for the coolant to start pooring out!
#3
Re: how to bleed the cooling system (sorullo)
You also need to remove the bleed bolt. Start at step 8. Is the engine over-heating?
Modified by RonJ@HT at 12:53 AM 7/12/2008
Modified by RonJ@HT at 12:54 AM 7/12/2008
Modified by RonJ@HT at 12:53 AM 7/12/2008
Modified by RonJ@HT at 12:54 AM 7/12/2008
Thread
Thread Starter
Forum
Replies
Last Post
motegicivic
Honda Civic / Del Sol (1992 - 2000)
13
07-04-2011 05:35 PM
Nkietzer
Honda Accord (1990 - 2002)
9
08-31-2010 04:33 PM
tmurda253
Honda CRX / EF Civic (1988 - 1991)
13
11-04-2008 08:53 PM
NoVALude
Honda Prelude
3
07-11-2006 11:06 AM