Notices

Boosted car not starting Map Sensor

Old 05-28-2008, 04:51 PM
  #1  
Junior Member
Thread Starter
 
Akalima's Avatar
 
Join Date: Sep 2003
Location: Sylvan Lake, AB, Canada
Posts: 193
Likes: 0
Received 0 Likes on 0 Posts
Default Boosted car not starting Map Sensor

K just wondering if the MAP with prevent a car form starting. I have a 99 gsr turboed. The wires r good, fuel pump works, injectors are getting power, the dizzy is new. The car will turn over but will not fire and the iac will start buzzing. I am using a piggyback computer but im thinkin if that were toast the car would still start but run rich. So im left with not enough fuel pressure of map im thinkin.
Old 05-28-2008, 08:11 PM
  #2  
Junior Member
 
hybridsol's Avatar
 
Join Date: Mar 2002
Location: V8 Land, State of, USA
Posts: 372
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Boosted car not starting Map Sensor (Akalima)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Akalima &raquo;</TD></TR><TR><TD CLASS="quote">K just wondering if the MAP with prevent a car form starting.</TD></TR></TABLE>

No. It will prevent it from idle-ing. Is it throwing a code? Sounds like you have the plugs mixed- I think they are the same (3-pin round)
Old 05-29-2008, 05:43 AM
  #3  
Junior Member
Thread Starter
 
Akalima's Avatar
 
Join Date: Sep 2003
Location: Sylvan Lake, AB, Canada
Posts: 193
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Boosted car not starting Map Sensor (hybridsol)

No codes. It was running in oct. then wouldnt start again. What do u mean 3pin?
Old 06-01-2008, 08:08 AM
  #4  
Junior Member
Thread Starter
 
Akalima's Avatar
 
Join Date: Sep 2003
Location: Sylvan Lake, AB, Canada
Posts: 193
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Boosted car not starting Map Sensor (Akalima)

BUMP
Old 06-01-2008, 09:34 PM
  #5  
Honda-Tech Member
 
akira712's Avatar
 
Join Date: Aug 2005
Location: NA
Posts: 548
Likes: 0
Received 0 Likes on 0 Posts
Default

map and tps use the same connector so its possible to mix them up
Old 06-02-2008, 01:23 AM
  #6  
Honda-Tech Member
 
JaredKaragen's Avatar
 
Join Date: May 2007
Location: Gilroy, Ca, USA
Posts: 599
Likes: 0
Received 0 Likes on 0 Posts
Default

your MAP sensor will have these 3 colors:

Yellow/Green [or Yellow/Red]
Black/White
White

This way you can know which is which.
Old 06-02-2008, 06:57 AM
  #7  
Honda-Tech Member
 
cpierich's Avatar
 
Join Date: Nov 2006
Location: Harrisburg, PA
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
Default

Just had that same problem. I tried everything and it turned out to be the coil. I know you said you have a new dizzy but i was under the impression i did too. Just a thought...
Old 06-02-2008, 12:13 PM
  #8  
Honda-Tech Member
 
champLSinteg's Avatar
 
Join Date: Feb 2006
Location: East Bay, CA, USA
Posts: 1,524
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (cpierich)

Yes. the map sensor can make it not start. A buddy of mine had the motorola 2.5bar and somehow one of the legs broke off flush to the sensor. It would not start at all. He disconnected the 2.5bar and hooked up the stock map that was still on the tb and luckily I had a chip with from my previous tune with the same size injectors on the stock map. It fired right up and was able to cruise it home.
Old 06-02-2008, 04:03 PM
  #9  
Junior Member
Thread Starter
 
Akalima's Avatar
 
Join Date: Sep 2003
Location: Sylvan Lake, AB, Canada
Posts: 193
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (champLSinteg)

I know its not the coil. It happend befor e i changed the dizzy out with a complete unit from distributor king. Ill see if i have continuity on the pins from the map sensor before i spend the bucks on a new one.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JasonHi
Honda Civic / Del Sol (1992 - 2000)
17
06-18-2020 06:34 PM
MatthewMenze
Engine Management and Tuning
4
05-01-2014 01:24 PM
russ.shafer
Acura Integra
10
05-19-2013 02:29 PM
alfee
Tech / Misc
4
08-16-2006 01:07 PM


Thread Tools
Search this Thread
Quick Reply: Boosted car not starting Map Sensor



All times are GMT -8. The time now is 10:26 AM.