**skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
#1301
Honda-Tech Member
iTrader: (9)
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
ahhh yes the good ol' woolite to clean those red recaros... woolite worked miracles on my old set of USDM itr seats. Ur seats came out clean my friend
good shyt skipunk4. solid work man. solid work.
good shyt skipunk4. solid work man. solid work.
#1303
Honda-Tech Member
Join Date: May 2009
Location: Seattle, WA
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
Just came through for my weekly thread inspection, you sir are approved for another ballin update
seats came out great man.
seats came out great man.
#1304
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
I like how it all looks and wires up original and how it matches with the dash. Also lights up amber to match the rest of the lighting on the dash
Been workin a lot but have the next couple days off so look for updates on the engine /harness
#1305
Honda-Tech Member
Join Date: Feb 2010
Location: My girlfriend is Taylor Swift, CA
Posts: 1,303
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
I think I might use woolite on my stock seats they're dirty as fucc lol.
#1306
Honda-Tech Member
Join Date: Feb 2009
Location: Stockton California
Posts: 701
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
Oooh ok. I still think double din is the way to go. Hahaha. It does look good though
#1309
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
Nice choice man, there not to spendy either which is nice, I'd say $50-100 depending on condition
Thanks man, much appreciated
Spent a little time on the car yesterday. Started off workin on these little block plates for the seat rails.
You can see in the pic that the seat rail doesn't completely cover the hole in the carpet so I wanted to make somethin to clean it up a little bit
Started off with a spare kick panel out of another integra and some tools
Measured and masked the size piece I needed
Then cut away, razor ended up cutting the cleanest and easiest
I then laid the plastic piece and place and marked where a hole would need to go for the bolt then drilled it out and there you go!
No more seeing the nasty floor through the carpet and now the seats were now ready to go in
Got so excited I had to toss the passenger seat in. Went and started mounting up the rails.
Layed the seat out on the table to make it nice and easy
New hardware
Rail all mounted up
And vwalah!
One more shot of the rail mounted up with the new block plate
Was havin fun workin on the car so I just kept workin on putting the interior together, pretty much all complete except a few small things
Decided it was time to toss the Spoon cluster in and I finally got to see it light up for the first time!
All bolted up
Lights up soo pretty, was so lame went to turn it on the first time and a bulb was burnt out Fixed that problem REAL quick and oh man it is awesome
Was so stoked on the cluster I decided to toss the itr mats in, and then came the Nardi lol
Driver seat is goin in a little later because it's getting a little repair on the foam in one of the bolsters to firm it up and reduce ware on the fabric
That's all for now, need to start gettin busy on that engine harness and gettin the suspension up More updates coming soon to a thread near you!
Happy Thanksgiving everyody
#1311
Honda-Tech Member
Join Date: Feb 2009
Location: Stockton California
Posts: 701
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
Hahaha don't give me credit for you block off idea! It's starting to look complete!! Great job!
#1315
Honda-Tech Member
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
i love how you take the time to even make the parts and details that no one is ever gonna see perfect. thats attention to detail.
#1317
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
Thanks fellas
Woke up to a surprise this mornin..
Had been waiting to get my stuff back from powdercoat for a few weeks now and my bro in law woke me up after pickin it up for me today
Pretty stoked how everything came out, might need to get one thing re done but we'll see what happens.
Some of you might remember how the mc brace looked when I got it, if not here's a reference pic
So stoked how it came out overall Just need to get a new bolt and it'll be done!
And here it is mocked up with the new hardware
And was able to get some pics of the Spoon cluster all lit up last night
Was havin trouble with the flash on the camera so my bro in law helped with the shot lol
Got a little progress on the engine harness, but still got a lot left to do on it. More progress coming soon!!
#1325
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
I have a mr dc2 like this and i wish my project could be as detailed as yours! good luck with the car bro cant wait to see the end product