**skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
#1126
Honda-Tech Member
Join Date: Dec 2006
Location: Dallas Texas
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
#1128
Honda-Tech Member
iTrader: (1)
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
I gotta say dude, I've thoroughly enjoyed reading your thread. Just read the first page today and never looked back cuz it just kept getting better and better, lol. I'm a was taken back by your attention to detail and overall devotion to your build. Really hope your able to finish this and hope it turns out great.
I'mma get my *** up tomorrow and clean the sh*t out of my EJ2. Thanks for sharing, mang.
I'mma get my *** up tomorrow and clean the sh*t out of my EJ2. Thanks for sharing, mang.
#1129
Honda-Tech Member
Join Date: Dec 2006
Location: Dallas Texas
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
#1131
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
That horn is sick, but I just don't know bout the yellow in my interior, I'm probly gonna be swoopin my old Recaros back if all goes to plan
Thanks man, and your tellin me! I'm workin on it man
Thank you for the words man, very much appreciated
Swoop it homie!
Thanks man
Don't have much progress on the car unfortunately. Too much other stuff goin on right now and no time for the car
I did end up getting a tiny bit of work done but not much. Only had 1 day off from work this week and ended up pulling a muscle in between one of my ribs causing it to twist up the day before. So pretty much took it easy and was dazed on pain killers all day. X-rays tomorrow
Started off with some wiring. Need to finish up the headlight harnesses so that the front end can start comin back together
Supplies
Needed to make some new grounds and clean up some of this mess
New grounds
More harness progress soon..
Also picked up some new hardware for my pedal assembly. The stuff it came with was all worn and rusty
Old and rusty top, new black onyx anit-rust hotness bottom
New hardware mocked up
Also tossed some 3M double sticky on the back sides for extra grab and less chance of comin loose
Picked up new hardware for the wheel as well so tossed it on along with the horn to see how it all looks. Really dig on this setup
Still waitin on some new goods this week so stay tuned!
I gotta say dude, I've thoroughly enjoyed reading your thread. Just read the first page today and never looked back cuz it just kept getting better and better, lol. I'm a was taken back by your attention to detail and overall devotion to your build. Really hope your able to finish this and hope it turns out great.
I'mma get my *** up tomorrow and clean the sh*t out of my EJ2. Thanks for sharing, mang.
I'mma get my *** up tomorrow and clean the sh*t out of my EJ2. Thanks for sharing, mang.
Swoop it homie!
Thanks man
Don't have much progress on the car unfortunately. Too much other stuff goin on right now and no time for the car
I did end up getting a tiny bit of work done but not much. Only had 1 day off from work this week and ended up pulling a muscle in between one of my ribs causing it to twist up the day before. So pretty much took it easy and was dazed on pain killers all day. X-rays tomorrow
Started off with some wiring. Need to finish up the headlight harnesses so that the front end can start comin back together
Supplies
Needed to make some new grounds and clean up some of this mess
New grounds
More harness progress soon..
Also picked up some new hardware for my pedal assembly. The stuff it came with was all worn and rusty
Old and rusty top, new black onyx anit-rust hotness bottom
New hardware mocked up
Also tossed some 3M double sticky on the back sides for extra grab and less chance of comin loose
Picked up new hardware for the wheel as well so tossed it on along with the horn to see how it all looks. Really dig on this setup
Still waitin on some new goods this week so stay tuned!
#1133
Honda-Tech Member
Join Date: Dec 2006
Location: Dallas Texas
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
Lookin good man gettin the murdered out interior goin.
Thanks for the horn button pass of hahaa
Thanks for the horn button pass of hahaa
#1135
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
More updates soon!
lol for sure man
Man I hear you on that. Wiring is my least favy
Man I hear you on that. Wiring is my least favy
#1137
Honda-Tech Member
Join Date: Sep 2010
Location: On The REG
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
#1138
Honda-Tech Member
Join Date: Feb 2010
Location: My girlfriend is Taylor Swift, CA
Posts: 1,303
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
Do you have any pics of how the car looks like at its current state? Haven't seen it in a while.
#1139
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
Thanks man. Can't wait to get it all in there and see it!
I got em off of craigslist, but they aren't too common and are usually $1-300 used
Haha I'll see what I can do
I got em off of craigslist, but they aren't too common and are usually $1-300 used
Haha I'll see what I can do
#1140
Honda-Tech Member
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
By far one of my favourite builds I've read so far. You're attention to detail is awesome.
#1141
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
#1142
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
Sorry for the lack of progress on the car been dealin with lots of other stuff and the cars been being neglected.
I did however get some stuff in the mail
Got an order from Jegs
It turns out the rear trailing arm bushings I got were for da so I had to get new ones
At least the new ones are black
Also got some Russell brake lines to replace the stocks.
They are DOT approved, steal braided, teflon caoted with oem style mounting hardware.
Real happy with the quality
Spent some time and tossed up the pedals up. Stoked on how they came out with the new hardware
Also got the brake rotor faces painted up and tossed em on, just waitin on brake pads and extended front ball joints
And here's a pic of the car in its current state..
I did however get some stuff in the mail
Got an order from Jegs
It turns out the rear trailing arm bushings I got were for da so I had to get new ones
At least the new ones are black
Also got some Russell brake lines to replace the stocks.
They are DOT approved, steal braided, teflon caoted with oem style mounting hardware.
Real happy with the quality
Spent some time and tossed up the pedals up. Stoked on how they came out with the new hardware
Also got the brake rotor faces painted up and tossed em on, just waitin on brake pads and extended front ball joints
And here's a pic of the car in its current state..
#1144
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
#1146
Honda-Tech Member
Join Date: Mar 2008
Location: NW
Posts: 2,000
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
Looking at it a second time I noticed the pedal assemblies up, looks excellent Coop
I'm really digging those replacement brake lines.
I'm really digging those replacement brake lines.
#1148
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
Thanks mang
Thanks homie. Don't forget to text me pics! You know what I'm talkin about
Saw em for the first time in your thread! They looked so nice I had to swoop a set of my own
Saw em for the first time in your thread! They looked so nice I had to swoop a set of my own
Last edited by skipunk4; 10-09-2010 at 10:29 AM.
#1149
Honda-Tech Member
Join Date: Nov 2008
Location: I'm burning in, Arizona
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Re: **skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
Dang, you're basically gonna have a brand new Integra. Been watching this thread since you had the red Recaros and RPF1's