b series swap in an ek hatch
#1
Honda-Tech Member
Thread Starter
b series swap in an ek hatch
Ok so im doing a ls vtec setup both the head and the block are gonna be obd2 i actually have 2 different questions
1 is and obd1 gsr head any different than a obd2 gsr head?
2 If i get a 00 si harness will i be able to pull it in inside the car or is the d series dx harness a one peice design? Can i use the d series harness will it just plug right up to the b series?
1 is and obd1 gsr head any different than a obd2 gsr head?
2 If i get a 00 si harness will i be able to pull it in inside the car or is the d series dx harness a one peice design? Can i use the d series harness will it just plug right up to the b series?
#2
Honda-Tech Member
Join Date: Apr 2008
Location: Lost Gates
Posts: 2,313
Likes: 0
Received 0 Likes
on
0 Posts
Re: b series swap in an ek hatch
99-00 si harness is OBD2b so its 2 piece..
i think any 96-98 ex harness would be your best bet, since you're going ls/vtec.. one piece harness since its OBD2a
it depends on what year your hatch is though.. if yours is 96-98, get a 96-98 harness, or 99-00 get a 99-00. just to make it easier for yourself.
i think any 96-98 ex harness would be your best bet, since you're going ls/vtec.. one piece harness since its OBD2a
it depends on what year your hatch is though.. if yours is 96-98, get a 96-98 harness, or 99-00 get a 99-00. just to make it easier for yourself.
Thread
Thread Starter
Forum
Replies
Last Post
honda_hackett
Honda Civic / Del Sol (1992 - 2000)
1
11-25-2008 01:17 PM
tayhas
Texas -OK -LA (Sales)
1
02-25-2007 09:39 AM