robs97

i just found the ecu for the 3 stage vtec however I need to find out where the red/white wire from the 1st vtec goes....I know the y8 harness is plug n play with this ecu so the yellow/green wire for the other vtec is already in the correct spot I just need to wire in the other vtec.....I have searched everywhere no answers....

need this pinout to compete this ecu conversion...

thanks

all HELP is welcome

BlueIntegraBoy

iTrader: (5)

http://hondaswap.com/ecu-s-ele...58066/

robs97

I will try it connecting the red/white wire to the A21 and will see what happens....thanks

robs97

A21 is the correct pin...worked great....

BlueIntegraBoy

iTrader: (5)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by robs97 &raquo;</TD></TR><TR><TD CLASS="quote">A21 is the correct pin...worked great....</TD></TR></TABLE>

Haha, nice. Motor running 100%?

robs97

yup 100%

mos

MPG?????????? I have one of these heads, thinking about finally puttin it on now that gas is WTF. Graveyard brumple, so sue me.

97dxred

[QUOTE=robs97;33021474]i just found the ecu for the 3 stage vtec however I need to find out where the red/white wire from the 1st vtec goes....I know the y8 harness is plug n play with this ecu so the yellow/green wire for the other vtec is already in the correct spot I just need to wire in the other vtec.....I have searched everywhere no answers....

need this pinout to compete this ecu conversion...



DOES ANYONE KNOW WHERE I CAN GET ONE OF THESE ECU'S
I cannot get my car inspected until I find one. Any help would be greatly appreciated, and even paid if I find one. Thanks again

tony_2018

I don't think it would help because they need to read the ecu, and there computers will not be able to read a jdm ecu.