boogienights

I have a b18a1 with b16 pistons and rods, i/h/e, and chipped ecu.

i am buying a built head that has been ported, the guy whos selling it made about 170whp on his ls with a stock bottom end and Weber cams, but its coming without cams. With the bump in compression im hoping to make around 180 to the wheels.

He also has a set of jg 301 cams that he is selling, i also saw bisi does regrinds for cheap, and there is the crowers.

Im basically looking for the cam thats going to make the most power. Will probably run a 68mm TB with a skunk 2 manifold.

Thanks guys.

0Sales@Bisimoto.com

Shot you a PM, if you have any questions let me know!

boogienights

thanks randull...i pm'd you back

0Sales@Bisimoto.com

no prob,

shot you another pm back!

boogienights

bump

K7-1Ktrevor

its really up to you. Iv seen alot of good numbers out of crower 404's, not to mention how cheap I can get them through my local shop

xSteve_Ox

Same build with same goals, and you're from MD lol, I'm going to be running Brian Crower Stage 2's in mine. 68mm TB and a intake manifold as well.

boogienights

actually i live in DE now, where you located?

i found a good deal on some JG 301's and some crower 403s

still undecided at this point