Notices
Honda Civic (2006 - 2015) 2006 - 2015 Civic Forums

Low Clearance Scrape

Old 12-02-2007, 01:55 PM
  #1  
Thread Starter
 
ooskers's Avatar
 
Join Date: Nov 2007
Location: Dallas, TX, United States
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default Low Clearance Scrape

I have an '08 Si. I was cruising along and didn't pay attention to this weird set of dips at an intersection and scraped the tow hooks underneath the car as I rolled through. Nothing else is scraped besides those little flexible mud flaps on the sides. The welds appear to be intact on the hooks nor are the wheels dented. I wasn't going terribly fast; 20 mph at most. The car drives like new and feels exactly the same. It is just that these kind of things don't make me feel any better. I am in general a very careful driver and really baby the car. Haven't even gone past 4.5 RPMs. Do you guys think that there is anything to watch out for in terms of stuff that might have shifted or even broken? I popped the hood and everything looks fine. I am no authority on engines so I won't even pretend. But, the belts run straight, there are no squeaks and it starts up just fine. Although it does idle near 2000 RPMs when I start it in the morning. After I start it later, it idles near 1000. I suppose that is normal though.

This is the drivers side. It is the worse than the other.

Old 12-02-2007, 02:13 PM
  #2  
Honda-Tech Member
 
yuning83's Avatar
 
Join Date: Mar 2007
Location: Franklin, WI, USA
Posts: 554
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Low Clearance Scrape (ooskers)

I don't think you have anything to worry about really.
Old 12-02-2007, 02:52 PM
  #3  
NO MERCY!
 
RICO_'s Avatar
 
Join Date: Dec 2006
Location: San Antonio, TX, U.S.
Posts: 4,914
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Low Clearance Scrape (yuning83)

That's not a "low clearance" scrape. That would have occured on your roof. You just "bottomed out". Nonetheless the car will be fine.
Old 12-02-2007, 03:12 PM
  #4  
Thread Starter
 
ooskers's Avatar
 
Join Date: Nov 2007
Location: Dallas, TX, United States
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Ahhh...
Thanks guys
Old 12-02-2007, 07:52 PM
  #5  
Honda-Tech Member
 
dt98gsr's Avatar
 
Join Date: May 2006
Location: New Jersey, USA
Posts: 3,156
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Low Clearance Scrape (ooskers)

Furst of all my car is lowered on coilovers a few inches with the HFP lip kit and the only thing I have ever bottomed out on are the front brake ducts (little flaps your talking about), so you must have either been going too fast or hit some pretty serious bumps to bottom out on your tow hooks without your car being lowered.

Aside from that I would be more concerned with crasked rims, or suspension damage. Nothing should be wrong under the hood.
Old 12-03-2007, 05:51 AM
  #6  
Honda-Tech Member
 
WILD_WILL's Avatar
 
Join Date: Jul 2006
Location: Westchester, NY
Posts: 1,811
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Low Clearance Scrape (dt98gsr)

I am on Eibach sportlines and scraped the underside all the time i just cant prevent it some times sucks but no real damage so far.
Old 12-03-2007, 11:39 AM
  #7  
 
jumboshrimp23's Avatar
 
Join Date: Sep 2007
Location: Los Angeles, CA, USA
Posts: 104
Likes: 0
Received 0 Likes on 0 Posts
Default

That looks like nothing and shouldn't be a problem. I bet my underbody is all scratched up too. My front bumper is all scratched up from the bottom, but it is hard to notice. The only way to notice it is to bend down and look under the car. This is the main reason why I dont wanna drop my car. I will probably have some serious problems if I get a drop.
Old 12-03-2007, 03:45 PM
  #8  
Thread Starter
 
ooskers's Avatar
 
Join Date: Nov 2007
Location: Dallas, TX, United States
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Cool guys. I feel better now. No, my car is not lowered. The intersection was VERY weird: Like two reverse speed bumps. As I said, about 20 mph.
Old 12-03-2007, 07:16 PM
  #9  
Honda-Tech Member
iTrader: (1)
 
24boosted's Avatar
 
Join Date: Dec 2006
Location: OC, CA, US
Posts: 1,049
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (ooskers)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ooskers &raquo;</TD></TR><TR><TD CLASS="quote"> Like two reverse speed bumps.</TD></TR></TABLE>

Like two dips? lol I can see how that can happen if the car were to recoil after hitting the first and landing on the second. Like everyone else said you'll be fine. Unless you see oil on the floor and a cracked pan. lol J.K
Old 12-05-2007, 01:00 PM
  #10  
 
Cvicex609's Avatar
 
Join Date: Oct 2007
Location: San Diego, Ca, US
Posts: 62
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Low Clearance Scrape (ooskers)

looks fine to me dude, dont tripp
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jz6m
Honda Civic / Del Sol (1992 - 2000)
9
05-02-2012 12:33 PM
prwil3030
Honda Civic / Del Sol (1992 - 2000)
8
04-28-2009 04:15 PM
Chris93Si
Acura Integra Type-R
20
08-01-2006 11:12 AM
OrangeBoost
Forced Induction
13
08-01-2006 05:13 AM
Rain_man
Tech / Misc
10
02-10-2003 01:52 PM


Thread Tools
Search this Thread
Quick Reply: Low Clearance Scrape



All times are GMT -8. The time now is 03:41 PM.