civic si cluster question
#1
Junior Member
Thread Starter
Join Date: Dec 2007
Location: NJ
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
civic si cluster question
the 00 civic si cluster has the big red si logo on it, is there any out there that do not have the logo? the same as the si cluster but no logo?
#3
Honda-Tech Member
Re: civic si cluster question
unless you go into spoon which has green needles and a spoon logo.... or CTR with yellow needles and CTR logo......
#4
Junior Member
Thread Starter
Join Date: Dec 2007
Location: NJ
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: civic si cluster question
couldnt i just take out the bulb behind the si logo? i want to get the cluster and put in new led bulbs and just leave out the bulb behind the si logo?
#5
Honda-Tech Member
Join Date: Apr 2007
Location: Phoenix, AZ, USA
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Re: civic si cluster question
You can get an EX cluster if the reason you want an Si cluster is for the tach. EX clusters have a tach. The markings for red line is different. Max speed is also different, as well.
#6
Junior Member
Thread Starter
Join Date: Dec 2007
Location: NJ
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: civic si cluster question
i actually have the ex cluster in now my car is a 00 ex but i like the look of the si cluster with the lines between the speeds instead of blue blocks.
#7
Honda-Tech Member
Re: civic si cluster question
pulling the bulb will eliminate it at night, you could tape it all off and paint it...but thatd possibly be a pain in the ***. good luck finding a CTR cluster...thatd be what i go with.
Trending Topics
#8
#11
Honda-Tech Member
Join Date: Oct 2008
Location: 3 doors down
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Re: civic si cluster question
I don't like the Si logo either. But I hate white lighting and blue outlines of the stock EX even more. You can do what I did, find a CDM, EDM, or JDM SiR gauge cluster that either has a broken speedo or tach, but still has a working gas/temp gauge(it'll be much cheaper buying a broken cluster), and swap the gas/temp gauge into your USDM cluster. Since the non-USDM gauge clusters do not have the Service Indicator on the Speedo, that's usually where the logo goes. And the gas/temp gauge is totally logo-free! If you find a SiR cluster, then it should match the color/fonts of tach and speedo. I tried to buy the CDM SiR gas/temp gauge seperately from Canadian Honda Dealers, but no one was willing to ship to the states, so I had to resort to buying a used cluster.
#12
Honda-Tech Member
Re: civic si cluster question
Check the jdm ek4 cluster. I think this one is kinda cool cuzz everything on it is solid red. only problem is that everything is in km/hr
#13
Honda-Tech Member
Join Date: Jun 2009
Location: Naptown, MD
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Re: civic si cluster question
i love the em1 cluster. dont know why you would want to get rid of it but try taking the cluster out an painting black behind the SI symbol. that might help
#14
Honda-Tech Member
Join Date: Apr 2005
Location: Somewhere, USA
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Re: civic si cluster question
the "si" in the cluster dosen't illuminate on them....
but if you just don't want to see it, painting over it in black is just going to make it more visable, plus your killing the cluster.
but if you just don't want to see it, painting over it in black is just going to make it more visable, plus your killing the cluster.
#16
Honda-Tech Member
Join Date: Aug 2008
Location: Lexington Park, MD, USA
Posts: 1,030
Likes: 0
Received 0 Likes
on
0 Posts
Re: civic si cluster question
Get a crv cluster... It has red lighting and no Si logo and is plug and play... The only difference is it has little orange rings around the gauges...
#17
Honda-Tech Member
iTrader: (1)
Thread
Thread Starter
Forum
Replies
Last Post
djmatix
For Sale
1
08-17-2002 12:38 PM