Can I use my d16z6 nonvtec distributor on mi mini me swap?
10-30-2007, 05:44 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2007
Location: Caguas, PR, USA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Can I use my d16z6 nonvtec distributor on mi mini me swap?
I'm doing a mini me swap and I was wondering if i can use the d16z6(i think it is but im shure is 1.6) nonvtec distributor?
10-30-2007, 05:50 PM
#2
Honda-Tech Member
Join Date: Jan 2006
Location: Rochester, New York -> Santa Clara, CA
Posts: 10,443
Likes: 0
Received 2 Likes
on
2 Posts
Re: Can I use my d16z6 nonvtec distributor on mi mini me swap? (charlieboyhonda)
I'm 99.9% sure you can as long as it's going into the Z6 head, but you might wanna get a confirmation on that.
10-30-2007, 05:57 PM
#5
Honda-Tech Member
Join Date: Jan 2006
Location: Rochester, New York -> Santa Clara, CA
Posts: 10,443
Likes: 0
Received 2 Likes
on
2 Posts
Re: (charlieboyhonda)
In terms of OBD-I any USDM VTEC was a 1.6, the B7's and B8's were all 1.5's - even the Z1 - but that wasn't VTEC, that's VTEC-E (and in my mind totally different).
If you have a USDM 5th gen 1.6, it's a Z6.
If you have a USDM 5th gen 1.6, it's a Z6.
10-31-2007, 06:33 AM
#6
Honda-Tech Member
Join Date: Jan 2006
Location: Ottawa, On, canada
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
if your D-series is non v-tec, then its a usdm 1.5, or a jdm 1.6 zc non v-tec..
if its a motor with v-tec it will be a usdm d16z6. or a jdm d15b. or a zc with v-tec.
sounds to me like youy engine is a d15b7 non -vtec, and it will not work on the v-tec head. the bolts wont line up
if its a motor with v-tec it will be a usdm d16z6. or a jdm d15b. or a zc with v-tec.
sounds to me like youy engine is a d15b7 non -vtec, and it will not work on the v-tec head. the bolts wont line up
Thread
Thread Starter
Forum
Replies
Last Post
lufus satartia
Honda Civic / Del Sol (1992 - 2000)
1
03-15-2013 11:58 AM
1990hondaHF
Honda Civic / Del Sol (1992 - 2000)
3
10-18-2007 09:43 PM
