Misha's 91 DX (lots of pics)

[misha]

I know this is a freaken NOVEL, but you shoudl check it out, at least skim through As of Aug 2009: ********* JULY 1ST 2009, HAPPY CANADA DAY IM BACK AND RUNNING AGAIN, WILL UPDATE THIS THING I know there is alot of pages, but there is alot of updates, so screll down, check it out. Leave some love ***** This is how the car looked in the first week, May 5th 2005: than a little after i bean searching for a lip, got a 89 camry and made it fit; also i got a rear lip along with the amber corners and side markers. and my first performance upgrade than i basically had to get a tach and some 89 integra seat felt like a very nice upgrade: in the winter i couldnt work much on it because of the school, so there was nothgin going on with the car, but i managed to put this in while it was - 25 C out side fits like shit(didnt take long for me to go SI cluster instead My old concole, now sold to My_EFsedan Canada weather, it was so nice out, not a puddle so i washed my car: same evening: So, closer to the end of the winter and soe finals i got more time to do things to my car: and then i got some new yellow lights, whicht i made to fit in the high bean housing so i could run yeallow day lights like tegs do and then a mail man brought me some more goddies nothing major, but as i said its my firts actually seriouse car, so new skirts are on, lets just say i liked to experiment a little... this is how the car looked in the end of april 2007 and then i got new brakes, Canadian Tire for FTW! so finally i got really tired of ugly bay and desided to do some more work: more to come

This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Honda-Tech!

[misha]

so in the beging of the may i rellay started to work on it as much as i can so i could do more on the weekends:
Some got some clening up to do :













MPFI swap and lowered













a little bit of confusion with the hoses but i got it all sorted out by putting a TY connection in one of them:







and my cv was ripped so i had to replace that as well



so May 16 2007, finally got to do some suspension work on the sedan:



H&R springs with kyb, not half bad



EK springs i didnt end up using and ebay coilovers



front done







and finally how the car looks as for today may 24th 2007, sorry for the bad pics i just got to excited and had to take some shots:













freaken bolt broke off, so im waiting on the bushing to come in and cant drive it for a while

[mvm]

Keep up the good work !!

[STREETWERKZ]

doesnt look half bad for a beater. paint the wheels white, i think it would look a lot better.

[jpciii]

doin good things, bro. making progress.

[misha]

thanks,

Originally Posted by STREETWERKZ

doesnt look half bad for a beater. paint the wheels white, i think it would look a lot better.

not really a beater , im just a poor art student
i think white wheels would look kinda cheap, but may be something to consider, we'll see.

[sneakerfern]

good work .. are your drums pink?

[misha]

haha ya, we did it kinda for fun, good thing u cant see it with the wheels being so closed up, but ill paint em black later or something.

[STREETWERKZ]

Originally Posted by misha

thanks,


not really a beater , im just a poor art student
i think white wheels would look kinda cheap, but may be something to consider, we'll see.

oh, than sorry for calling it a beater.


i dont think white wheels would make it cheap. the army green just doesnt flow.

[mra4886]

hey misha sedan is looking good. keep it up. i love seeing all these ef sedan builds. well progress looks good.

[sohcvtec91hatch]

Those are some interesting Rotors. What is the point of making the slots look like atoms? Wouldn't the gasses just flow back into the groove? Good looking car, now that it's dropped. I was hoping for some lowering, that made all the difference! What is next performance wise?

[vdawg559]

looking good. but when i had a sedan before.. how u get it to drop low like that?

[crx18c1]

Looking good man...not a big fan of the four doors but nice work that your've done so far keep it up don't stop

[Bob_760]

Originally Posted by STREETWERKZ

the army green just doesnt flow.

I agree, I dono about white on those wheels I think black would look good. Either way lookin good.

[misha]

thanks guys, ya i thought about the black, and it if i would wanna go with some dark colour, i figure i should do somethign wierd like this green, but again i might change it up a bit later.

For the susp. i used EK springs in the front, they were supposed to be 1.85 drop, but the car went down 2.5 in the fron and eems that itwill be a little bit lower after it settles more.

EK springs didnt wanna work in the back at all, lol they raised the sedan about 2 inches first in the back, so i had to use coil overs, they ride ok. I did drove t around the block that i saw taht bolt really moving so i parked it.

Havnt drove it for a week now, but im gonna put a new bushing hopefully tomorrow so it will be all good

[~sp33~]

Car has come a long way Camry lip ftw.

[dohc_profile]

how much were those rotors and pads?

[Matt (SG)]

Ohh, thats a pretty rare console to find in Canada. I'm looking for one for my Hatch. How do you install it? Do you just have to buy that one extra middle piece or do you have to buy the whole thing for it to fit?

[FernEF]

not bad...

[misha]

Originally Posted by ~sp33~

Car has come a long way Camry lip ftw.

hell yea

Originally Posted by sohc_mnstr

how much were those rotors and pads?

50 for a rotor, 49 for the set of pads

Originally Posted by Matt (SG)

Ohh, thats a pretty rare console to find in Canada. I'm looking for one for my Hatch. How do you install it? Do you just have to buy that one extra middle piece or do you have to buy the whole thing for it to fit?

yes, hywe are rare, and it doesnt fit all that snug in there, but its alright. you cant just use the middle piece, one thing is< they wiring is different for the siggarette lighter.

[JKGONZALEZ3]

the car is looking tight misha

[spastik]

that slam made it look good, what springs/coilovers is that?

[misha]

H&R springs, and not sure about coil overs, feels to good to be ebay

Also, it was a good weekend:
1. new wall
2. fixed the sedan
3. a little photo shoot

[Bserieskllr]

cool project looks like its come pretty far so far, but why did u give me a thumbdown in my project thread?

[misha]

shit, i just looked, i was rushing in the morning and didnt pay attention and hit the wrong icon, really sorry about that dude. Your car and project thread deffinatley get

\
pwnd