Crx swap turning over but not starting
#1
Crx swap turning over but not starting
Hey so my car is not starting I have purchased new main relay and also new ignitor and spark plugs but yet doesn't still want to start I was getting spark than all the sudden it stopped I don't know what's the problem here it's my first swap so any info helps. does every sensor need to be hooked up as well? I'm almost tempted to take to an mechanic it's so frustrating
#3
Re: Crx swap turning over but not starting
Sorry took so long to respond lack of computer access but where can i find this helms manual is it at library or do i have to get it from the dealer
#4
Honda-Tech Member
Re: Crx swap turning over but not starting
Kragen has a Chiltons Manual, its like the same thing. But most people prefer Helms. Umm.. Just a thought, and Im only saying this because it happened to me when I was diagnosing an electrical problem I had. Check your underdash fuse box, Make sure all your fuses are good, because there's one that kills spark to your engine, so if you HAD spark and now you don't, you could have conceivably blown the fuse
Here is a diagram of a newer civic, because it's all I could find on Google, to show you which one I mean, Hope this helps.
Here is a diagram of a newer civic, because it's all I could find on Google, to show you which one I mean, Hope this helps.
Last edited by Romo Pyro; 02-09-2009 at 10:38 PM.
#5
Re: Crx swap turning over but not starting
hey so it started up when i figured out few things but now its not starting again fuel pump starts getting spark i don't know what to check now any suggestions
#6
Honda-Tech Member
Join Date: Sep 2003
Location: Austin, Republic of Texas
Posts: 3,234
Likes: 0
Received 0 Likes
on
0 Posts
sometimes . . . .
random thing to check when your car mysteriously won't start --> the switch that the clutch depresses. The little rubber thing that pushes the switch in will get old, deteriorate and break off or flex too much to push the plunger. I have had a couple of situations where I was going nuts trying to find the issue and eventually worked back to that.
#7
Re: Crx swap turning over but not starting
Hey guys thanks for the help seemed that the ignitor died in the dizzy which I already replaced before but anyways it's running really rough like no power at all any ideas?!! V tec definately not hooked up but would that really matter at this point I would but I'm gonna have to wire a bunch of diff things to n from ecu n vtec solenoid
Trending Topics
#8
Junior Member
Join Date: Oct 2009
Location: Sydney Australia
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Re: Crx swap turning over but not starting
If you keep blowing igniters get a new set of leads. Make sure they are plugged onto the correct plugs. Do not crank the engine with the dissy wired in but a plug lead off.
Thread
Thread Starter
Forum
Replies
Last Post
CRXstress
Tech / Misc
9
04-16-2005 08:39 PM
wizzards581
Honda Civic / Del Sol (1992 - 2000)
4
03-12-2003 08:38 PM