Slammed my Omni's
12-09-2006, 02:16 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2005
Location: Paint'n $hit from FL 2 GA
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
Slammed my Omni's
Just wondering how low everyone has dropped there cars. I slammed my omni's almost all the way down and now I drag my catalytic converter when I drive. Im running 205/45/16's . Bout to raise it up a little but was just wondering if anyone else has ran into this problem. 
02-14-2007, 07:01 PM
#2
OG Tech
Join Date: Jun 2003
Location: The Bay AREA/Truckee/Reno, CA, USA
Posts: 1,301
Likes: 0
Received 0 Likes
on
0 Posts
Re: Slammed my Omni's (SneezinCD5)
u know if u lower ur car 3" or more with the omni suspension their shocks will premature blow and they wont cover it in their warrenty. Anyways, sounds like u have it really low to the ground. I havnt had a problem with them.
02-14-2007, 08:59 PM
#3
Join Date: Sep 2006
Location: York, PA, United States
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Re: Slammed my Omni's (EGfosho)
When I first had my car lowered on 15's I used to drag my exhaust in roads where it was uneven a little bit. Still do sometimes and Im not that low. PA roads suck though.
02-16-2007, 06:40 AM
#6
Honda-Tech Member
Thread Starter
Join Date: Oct 2005
Location: Paint'n $hit from FL 2 GA
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
Re: Slammed my Omni's (SneezinCD5)
Well here are some pics. Car is currently down for awhile do to new interior and new engine/turbo setup. 
Before:
After:
Before:
After:
Trending Topics
02-16-2007, 08:36 AM
#10
Join Date: Jun 2006
Location: RP, NY, USA
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
ahhhh 5th gen accords looks so sweet slammed. my coupe was slammed like that too last summer but i cracked the midpipe on a speed bump! ha! so i ended up adjusting it back up and getting a new mid-pipe. but i loved so much how nice it looked low, but now i have a lipkit on to make it look low now. heh
I'll probably be lowering mine a bit more once I get my tires mounted on the ITR's i picked up
02-16-2007, 11:12 AM
#14
Honda-Tech Member
Re: (ECX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ECX »</TD></TR><TR><TD CLASS="quote">Too much wheel gap is teh fugly</TD></TR></TABLE>
I agree with you, which is part of the reason my own car is lowered. I've just never liked the whole slammed on the ground look.
Lowering your car that low not only causes you to scrape and bottom out on every little thing in the road, but the handling of the car is almost always worse than a less dramatic drop.
But to each his own.
BTW, what was the point of this thread? (Serious question.) It just seems like the OP just wanted to let everyone know his car is slammed...
I agree with you, which is part of the reason my own car is lowered. I've just never liked the whole slammed on the ground look.
Lowering your car that low not only causes you to scrape and bottom out on every little thing in the road, but the handling of the car is almost always worse than a less dramatic drop.
But to each his own.
BTW, what was the point of this thread? (Serious question.) It just seems like the OP just wanted to let everyone know his car is slammed...
02-16-2007, 05:24 PM
#15
Honda-Tech Member
Thread Starter
Join Date: Oct 2005
Location: Paint'n $hit from FL 2 GA
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
Re: (philadd)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by philadd »</TD></TR><TR><TD CLASS="quote">
BTW, what was the point of this thread? (Serious question.) It just seems like the OP just wanted to let everyone know his car is slammed...</TD></TR></TABLE>
Yeah like the title says I was just wondering if anyone has had the same problem when they slammed there car. Why is it always a big deal when a poet like this goes up? Some people have enough time to waste to complain about something stupid. I guess some people just like to pick and complain about worthless thing.
I am going to raise the car back up like I stated above once the engine/turbo setup and interior is complete. Just slammed it for a photoshoot and to see how it would look. I have always loved how a slammed car looks.
BTW, what was the point of this thread? (Serious question.) It just seems like the OP just wanted to let everyone know his car is slammed...</TD></TR></TABLE>
Yeah like the title says I was just wondering if anyone has had the same problem when they slammed there car. Why is it always a big deal when a poet like this goes up? Some people have enough time to waste to complain about something stupid. I guess some people just like to pick and complain about worthless thing.
I am going to raise the car back up like I stated above once the engine/turbo setup and interior is complete. Just slammed it for a photoshoot and to see how it would look. I have always loved how a slammed car looks.
02-16-2007, 06:18 PM
#17
Honda-Tech Member
Re: (SneezinCD5)
I was neither complaining nor making a big deal about your thread. I asked a serious question because, after all, this is a tech forum and OT threads aren't allowed. If I really wanted to complain, I would not have posted anything at all and just reported the thread.
And isn't it safe to assume that if your 5th gen Accord scrapes everywhere when you're lowered that much, that other 5th gen Accords will scrape just as much when lowered the same amount?
And isn't it safe to assume that if your 5th gen Accord scrapes everywhere when you're lowered that much, that other 5th gen Accords will scrape just as much when lowered the same amount?
02-16-2007, 06:53 PM
#18
Honda-Tech Member
Re: (philadd)
damn thats low, the "before pic" still looks awesome to, about how low mine is (the before pic that is) Didnt want to lower it anymore due to the problems ur having going that low 
.
.
02-16-2007, 11:40 PM
#20
Join Date: Sep 2006
Location: York, PA, United States
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Re: (95CDSedan)
That looks so nice. I love the hood and headlights. I have those same headlights, not installed, I have no idea how they are going to fit yet though being different bulb sizes,, If you wouldnt mind helping me out, send me a pm on how you got the headlight bulbs switched up and stuff.. Not trying to hijack the thread, but either way that looks sickkk. Good luck with that clearance though.
02-17-2007, 06:24 AM
#22
Honda-Tech Member
Re: Slammed my Omni's (SneezinCD5)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SneezinCD5 »</TD></TR><TR><TD CLASS="quote">Just wondering how low everyone has dropped there cars. I slammed my omni's almost all the way down and now I drag my catalytic converter when I drive. Im running 205/45/16's . Bout to raise it up a little but was just wondering if anyone else has ran into this problem. </TD></TR></TABLE>
ha ha..i had mine that low and it started to scrape on the freeway...
heres some speed bump action...oh..these are on the steelies but when im on my 16's i roll on 205/50
this was 2 years ago...i had it a lot lower...
</TD></TR></TABLE>ha ha..i had mine that low and it started to scrape on the freeway...
heres some speed bump action...oh..these are on the steelies but when im on my 16's i roll on 205/50
this was 2 years ago...i had it a lot lower...
02-17-2007, 06:29 AM
#23
Honda-Tech Member
Re: (Haccordclub)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Haccordclub »</TD></TR><TR><TD CLASS="quote"> That looks so nice. I love the hood and headlights. I have those same headlights, not installed, I have no idea how they are going to fit yet though being different bulb sizes,, If you wouldnt mind helping me out, send me a pm on how you got the headlight bulbs switched up and stuff.. Not trying to hijack the thread, but either way that looks sickkk. Good luck with that clearance though.</TD></TR></TABLE>
hey..the bulb thing...i had the same issues only that the Depe sent me a harness and it was plug and play...try looking for a harness...?
hey..the bulb thing...i had the same issues only that the Depe sent me a harness and it was plug and play...try looking for a harness...?
Thread
Thread Starter
Forum
Replies
Last Post
TEXAS PIMP
Forced Induction
11
01-14-2004 02:15 PM
