eg:R

started my car up in the morning and heard a rod bearing knock sound coming from the middle section of the block. the clicking sound seem to be more in the back of the block underneath the intake man. here are some pictures of rod 2 and 3 caps w/ acl bearings. just wondering if this was causing the noise. also found the rods and main bearings looking the same as these also.

[IMG][/IMG]

eg:R

nobody

tha_badguy

im no expert but look at the top of the 2nd bearing in paticular...

and up & down that one looks like it was touching the crank

galling?

eg:R

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tha_badguy &raquo;</TD></TR><TR><TD CLASS="quote">im no expert but look at the top of the 2nd bearing in paticular...

and up & down that one looks like it was touching the crank

galling?</TD></TR></TABLE>

what is the crank galling?

89s1

actually looks like a hair or some other foreign stuff embedded in the bearing material. (the bearing on the right in the pic)

tha_badguy

check the clearances...

eg:R

the block was plastigauge to specs

DonF

Those look like heat check marks. Not enough oil volume or too tight a clearance. Probably the later.