MisterMonkey26

Ive recently did a motor swap, I put a 94-97 B18 with a 2000 Integra AUTOMATIC tranny into a civic. nothing major just did the swap to have a little quick car to get around with. Well we got the motor into the car and when we test drove it the only gears I had was 1st and 3rd. I was wondering what I needed to do to get the 2nd and 4th gears. I know ont of my bussies said something about a TCU but I wasnt sure if that was the problem. If anyone knows whats wrong or has any idea how to help me please do.

95 integra

iTrader: (2)

Wiring or the cable that goes from the throttle body to the trans is messed up.

MisterMonkey26

which wire, I noticed that there is a plug missing on the tranny but couldnt find the wire on the throttle body you were talking about. Can you me what else I xcould check?

95 integra

iTrader: (2)

I dont know "which" wire, but there should be 2 cables on the throttle body and one of them goes to the transmission and is more or less tells the transmission the throttle position so that it knows when it shift.....or something like that.

andy_azn

2000 integra does not have a cable thats goes to the throttle body it is electric. check wiring to the tranny.

95 integra

iTrader: (2)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by andy_azn &raquo;</TD></TR><TR><TD CLASS="quote">2000 integra does not have a cable thats goes to the throttle body it is electric. check wiring to the tranny.</TD></TR></TABLE>

You sure about that? My 95 did and the 98 FSM says it does.



And no, that is NOT the throttle cable, it is a throttle control cable that runs from the throttle body pulley to the transmission. BTW, you should check out the factory service manual being that they have a trouble shooting guide with wiring diagrams and charts to help track down problems.