1992 honda prelude 2.3 si oxygen sensor wiring diagram
10-12-2006, 04:06 AM
#1
Thread Starter
Join Date: Oct 2006
Location: livingston, nj, usa
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
1992 honda prelude 2.3 si oxygen sensor wiring diagram
I just got this denso aftermarket o2 sensor and there is no harness on it, so i have to take the old harness and put it on the new sensor. Do you have a pic or can you tell me what the wires are on the original o2 sensor, ground, heater wire ect...
If not can you tell me how i can find out.
If not can you tell me how i can find out.
10-12-2006, 06:19 AM
#2
Honda-Tech Member
Join Date: Feb 2000
Location: Milwaukee, WI
Posts: 4,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1992 honda prelude 2.3 si oxygen sensor wiring diagram (92preludesi2.3)
I don't have my O2 sensor in front of me, so this is going off the Helms manual:
Using this diagram, you're looking at the O2's connector:
The Helms lists the connector from the wiring harness side, so the coordinating wires on the O2 connector are:
Top right: (heater +)
Top left: (heater - )
Bottom right: (sensor + )
Bottom left: (sensor - )
Hope that helps.
Using this diagram, you're looking at the O2's connector:
The Helms lists the connector from the wiring harness side, so the coordinating wires on the O2 connector are:
Top right: (heater +)
Top left: (heater - )
Bottom right: (sensor + )
Bottom left: (sensor - )
Hope that helps.
Thread
Thread Starter
Forum
Replies
Last Post
