Civic EK4 JDM Building Process...
#1
Thread Starter
Join Date: Apr 2004
Location: INDONESIA
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Build an EK4 JDM! update page 5...
as the topic says....
i'm located in indonesia... where its really hard to get jdm stuffs
anyway, wanna post this for sharing experience....
i've owned this car for about 5yrs, i'm getting bored with the looks and the engine 1.6L
got some mods like EK9 bodykit and regamaster rims...
next mod, re-paint new colour, spoon rims, new engine, aiming to get possibly very low 13s or hopefully very high 12s down the 1/4mile... (indonesia dont have proper drag track, so shitty traction guys! )
here are the picts of the car before the building process...
Modified by SLOW-HONDA at 7:21 PM 3/18/2007
Modified by SLOW-HONDA at 2:09 AM 3/19/2007
Modified by SLOW-HONDA at 8:48 AM 4/27/2007
i'm located in indonesia... where its really hard to get jdm stuffs
anyway, wanna post this for sharing experience....
i've owned this car for about 5yrs, i'm getting bored with the looks and the engine 1.6L
got some mods like EK9 bodykit and regamaster rims...
next mod, re-paint new colour, spoon rims, new engine, aiming to get possibly very low 13s or hopefully very high 12s down the 1/4mile... (indonesia dont have proper drag track, so shitty traction guys! )
here are the picts of the car before the building process...
Modified by SLOW-HONDA at 7:21 PM 3/18/2007
Modified by SLOW-HONDA at 2:09 AM 3/19/2007
Modified by SLOW-HONDA at 8:48 AM 4/27/2007
#2
Thread Starter
Join Date: Apr 2004
Location: INDONESIA
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
the first week....
take the engine out of the car, stripped the whole car and take it to smashrepair shop....
at this time i still dont know what colour suits best for my ride....
take the engine out of the car, stripped the whole car and take it to smashrepair shop....
at this time i still dont know what colour suits best for my ride....
#3
Thread Starter
Join Date: Apr 2004
Location: INDONESIA
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
the second week.....
i've chosen the colour! hehe..
yes i want blue... but again, still dont know which blue should i get for my ride... anyway, this week the car must get the basic colour painted....
i've chosen the colour! hehe..
yes i want blue... but again, still dont know which blue should i get for my ride... anyway, this week the car must get the basic colour painted....
#5
Thread Starter
Join Date: Apr 2004
Location: INDONESIA
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
the following week..
phiewwwwwwwwwww.......
i dont remember the colour code, but it was choosen from Dupont Paint...
i think its similar to Electron Blue Pearl....
phiewwwwwwwwwww.......
i dont remember the colour code, but it was choosen from Dupont Paint...
i think its similar to Electron Blue Pearl....
Trending Topics
#9
Thread Starter
Join Date: Apr 2004
Location: INDONESIA
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
finish the paint, havent installed some bits like front bumper and wing, coz i'm affraid got scratch in the speed shop....
now it comes to the speed shop... Sigma Speed... Indonesian....
now it comes to the speed shop... Sigma Speed... Indonesian....
#10
Thread Starter
Join Date: Apr 2004
Location: INDONESIA
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
new we're talkin engine
well its B20 block with ori B16 ek4 head... took off the engine number from the old engine and put on the new one undercover 1.6L
at the moment, i haven't decided what camshafts, valve springs and valves that i'm going to use.... still confuse guys.. need suggestions.....
as for bottom ends... 85mm CP Pistons (12,5:1), Eagle H-Beam Conrods, Clevite metals, balanced crank, Toda Flywheel, ACT clutch...
here are some picts...
well its B20 block with ori B16 ek4 head... took off the engine number from the old engine and put on the new one undercover 1.6L
at the moment, i haven't decided what camshafts, valve springs and valves that i'm going to use.... still confuse guys.. need suggestions.....
as for bottom ends... 85mm CP Pistons (12,5:1), Eagle H-Beam Conrods, Clevite metals, balanced crank, Toda Flywheel, ACT clutch...
here are some picts...
#11
Thread Starter
Join Date: Apr 2004
Location: INDONESIA
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
once again guys, i need suggestions for the cyl head parts....
got some camshafts to choose here... Crower Stage 3, Jun Stage 3, Skunk2 Pro Stage 2 or 3, Toda C, Buddy Club spec V...
anyone with good suggestion? as my compression ratio is around 12,5 guys...
hopefully anyone come up with good reasons also
engine building process is continue as we speak....
thanks
got some camshafts to choose here... Crower Stage 3, Jun Stage 3, Skunk2 Pro Stage 2 or 3, Toda C, Buddy Club spec V...
anyone with good suggestion? as my compression ratio is around 12,5 guys...
hopefully anyone come up with good reasons also
engine building process is continue as we speak....
thanks
#22
Honda-Tech Member
Join Date: Apr 2004
Location: Staples Center, CA
Posts: 2,273
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Gheydm)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Gheydm »</TD></TR><TR><TD CLASS="quote">nice, but it doesnt look like the block says B20.....?</TD></TR></TABLE>