New G22 Accord Dyno Video
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2010
Location: Greenville, NC
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
New G22 Accord Dyno Video
Here a video of my newly finished Hybrid F22b2/H22a Accord with GT3076R turbo at 15 lbs of boost.
http://www.youtube.com/watch?v=z8zkTaQhV48
http://www.youtube.com/watch?v=z8zkTaQhV48
#4
Honda-Tech Member
Thread Starter
Join Date: Jan 2010
Location: Greenville, NC
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
#5
Honda-Tech Member
Thread Starter
Join Date: Jan 2010
Location: Greenville, NC
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Re: New G22 Accord Dyno Video
#7
Honda-Tech Member
Thread Starter
Join Date: Jan 2010
Location: Greenville, NC
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Re: New G22 Accord Dyno Video
Wow those numbers are super low. Was this tuned at all. I knew of a guy in florida did a ebay turbo kit g22 with a gsr turbo base map untuned made 300whp on 10psi with a t3/t4 with a crappy exhaust manifold something's wrong. U should be a least making around 350whp at the most.
So was this tuned or on a basemap with no tune.
And also what does ur build consist of what type turbo header downpipe and exhaust are u running.
Maybe u have a restriction of some sort somewhere and and dyno graph would help a bunch if u could post.
So was this tuned or on a basemap with no tune.
And also what does ur build consist of what type turbo header downpipe and exhaust are u running.
Maybe u have a restriction of some sort somewhere and and dyno graph would help a bunch if u could post.
#10
Re: New G22 Accord Dyno Video
you should check out this guy g22 build he's making over 500 whp on 18psi.
http://www.cb7tuner.com/vbb/showthre...=27355&page=17
http://www.cb7tuner.com/vbb/showthre...=27355&page=17
#11
Honda-Tech Member
iTrader: (1)
Join Date: Mar 2008
Location: Blah Blah Blah, wa, Erf
Posts: 2,938
Likes: 0
Received 7 Likes
on
6 Posts
Re: New G22 Accord Dyno Video
you should check out this guy g22 build he's making over 500 whp on 18psi.
http://www.cb7tuner.com/vbb/showthre...=27355&page=17
http://www.cb7tuner.com/vbb/showthre...=27355&page=17
300WHP on 15 PSI with conservative timing on a NO compression motors not bad at all.
#12
Honda-Tech Member
Thread Starter
Join Date: Jan 2010
Location: Greenville, NC
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Re: New G22 Accord Dyno Video
Wow those numbers are super low. Was this tuned at all. I knew of a guy in florida did a ebay turbo kit g22 with a gsr turbo base map untuned made 300whp on 10psi with a t3/t4 with a crappy exhaust manifold something's wrong. U should be a least making around 350whp at the most.
So was this tuned or on a basemap with no tune.
And also what does ur build consist of what type turbo header downpipe and exhaust are u running.
Maybe u have a restriction of some sort somewhere and and dyno graph would help a bunch if u could post.
So was this tuned or on a basemap with no tune.
And also what does ur build consist of what type turbo header downpipe and exhaust are u running.
Maybe u have a restriction of some sort somewhere and and dyno graph would help a bunch if u could post.
#13
Honda-Tech Member
Thread Starter
Join Date: Jan 2010
Location: Greenville, NC
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Re: New G22 Accord Dyno Video
you should check out this guy g22 build he's making over 500 whp on 18psi.
http://www.cb7tuner.com/vbb/showthre...=27355&page=17
http://www.cb7tuner.com/vbb/showthre...=27355&page=17
#14
Re: New G22 Accord Dyno Video
I have full 3 in exhaust, custom 2.5" downpipe (would have been 3" but the a/c crap was in the way), Garrett GT3076R turbo, like I mentioned the compression is super low at 8.2:1 (stock gsr is like 10-11:1)and internally everything is stock, I wanna build the bottom end first, raise compression, and retune. It was dyno-tuned with Haltech Sprint 500 piggybacked on the stock f22b2 ecu. I will get a dyno chart as soon as I get up with the tuner.
And also i wasn't comparing to a gsr engine it was a gsr turbo base map on crome that the g22 was running on that made 300whp untuned.
#15
Re: New G22 Accord Dyno Video
Good stuff, a little low on power but given the turbo size, compression, and a very conservative tune up... your going to give up good bit.
I think I would look toward something like Hondata or similar for management and move away from piggy back systems. Although I am not very familar with the one your using.
Why would you use a gsr turbo basemap as a tune for a g22 turbo setup. Using a basemap from anyone else's setup is not a good idea, muchless from a totally different motor.
I think I would look toward something like Hondata or similar for management and move away from piggy back systems. Although I am not very familar with the one your using.
Once u get away from that piggy back u will make alot more power than u think. Even if u get tuned on crome pro there's alot of little adjustments u can make and it makes a huge difference.
And also i wasn't comparing to a gsr engine it was a gsr turbo base map on crome that the g22 was running on that made 300whp untuned.
And also i wasn't comparing to a gsr engine it was a gsr turbo base map on crome that the g22 was running on that made 300whp untuned.
#16
Honda-Tech Member
iTrader: (1)
Join Date: Mar 2008
Location: Blah Blah Blah, wa, Erf
Posts: 2,938
Likes: 0
Received 7 Likes
on
6 Posts
Re: New G22 Accord Dyno Video
PLEEEEZE no Hondata
OFF TOPIC: TWKD, go pick up this Month (September2010) Hondatuningmagazine.... Theres a bit of a surprise in it ;O)
OFF TOPIC: TWKD, go pick up this Month (September2010) Hondatuningmagazine.... Theres a bit of a surprise in it ;O)
#17
Re: New G22 Accord Dyno Video
also you should use a p-13 ecu and tune it on crome. just my 2cents
#18
Honda-Tech Member
iTrader: (1)
Join Date: Mar 2008
Location: Blah Blah Blah, wa, Erf
Posts: 2,938
Likes: 0
Received 7 Likes
on
6 Posts
Re: New G22 Accord Dyno Video
Negative p72 if available but i made 615 on crome for 2 years and it ran greeeeeat. As far as pistons do soem research, WIseco has an off the shelf evo stroker piston thats JUSDT wat you need
#20
Re: New G22 Accord Dyno Video
#21
Honda-Tech Member
Thread Starter
Join Date: Jan 2010
Location: Greenville, NC
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Re: New G22 Accord Dyno Video
Next thing to do is find a good set of pistons, raise the compression and retune. The tuner did do a very consersative tune, I want the setup to last until I start on the bottom end. The bottom end is stock and at like 180k miles, so the tuner thought 300 whp would suffice and I agreed... for now lol. I have some pics of the build that I will be posting soon as well as a list of all or most of the parts used lol. In about two weeks I plan on taking the car to the track and will be posting a video of that too.
#22
Honda-Tech Member
Join Date: Jan 2006
Location: Southern MD
Posts: 986
Likes: 0
Received 0 Likes
on
0 Posts
Re: New G22 Accord Dyno Video
what pistons are you looking at? when i looked around it seemed like the dsm piston setup would drop compression to 7.95:1. bisi makes like an 11.0 and an 8.2 compression when put into a stock f22...
#23
Honda-Tech Member
Thread Starter
Join Date: Jan 2010
Location: Greenville, NC
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Re: New G22 Accord Dyno Video
havent looked into it much lately, been working alot. I thinking 9.5-10.0 CR...
#25
Honda-Tech Member
Thread Starter
Join Date: Jan 2010
Location: Greenville, NC
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts