Snoxxy

Hey guys ...

I did the DPFI to MPFI conversion last night and this morning.
it all went well .. expect that the ECU is throwing codes left and right.
it had code 4 which went away when we didn't use the stock wiring which had to be jumped ... Now I get code 9 ... the car runs , but runs like ***. It actually sounds like a rotary with a small bridgeport.... Idle is eratic and there is like absolutly NO torque... I checked and rechecked my wiring ... it seems to be good....

I am desperate ..

I am using :
D16A6 Intake mani
91 Mugen chipped ECU ( from SI )
D16A6 dizzy ... ( from same car as ECU ) both ran....
Injector resistor from a 90 integra ( has the 4 black wires and 1 red rather then the 4 red and 1 yellow/black )

sorry to disturb

help needed ASAP

Phil