Honda and Acura Technical Forums

Nick M · 03-29-2006, 09:36 AM

This thread is NOT for cars for sale. This thread is strictly for parts.

YOU MUST START YOUR POST WITH FS: OR WTB:

What you can include in here:
Engines and all components
Trannies and associated drivetrain parts
Electrical items/ECUs
"All Motor" sized Slicks

What you can not include:
Suspension
Brakes
Wheels
Interior pieces such as seats etc
DO NOT reply to or quote posts, PM for questions.

Any violations of these basic rules, and the post will be deleted. and you MAY be docked user points/and or banned

http://www.hondamarketplace.com/zerothread/1845437

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

ghettocrxsi · 07-30-2007, 07:04 PM

I have a brand new jg header with the factory collector and is ceramic coated, I also have the 3" race pipe for use at the track. The race pipe is used but the header is brand new.

Make offer$$$

I also have a zeitronix wideband with lcd display with all the sensors, egt,boost,wideband and seriel cable. This is the best wideband out there!

Make offer$$$

Been used for 3 track pulls with 92 octane gas

M!lly · 08-02-2007, 10:36 AM

FS: GSR transmisson

open diff about 90k with no grinds

$550 obo

Modified by M!nes at 10:52 PM 8/5/2007

shrums-EG6 · 08-02-2007, 05:38 PM

for sale is

a gsr head worked on by portflow with
supertech valve springs and retainers
supertech flat faced valves
buddy club spec 5 cams
bdl camgears in silver

head has less than 2 miles just used for 2 hours on the dyno
their is nothing wrong with the head its in perfect condition
MAKE AN OFFER AND PLEASE DONT LOW BALL ME

performer x manifold portmached to a gsr head by portflow
comes with 70mm tb was used witht he gsr head less than 2 miles on it
500 firm

PM ME IF INTERESTED WILL SHIP AT BUYERS EXPENSE

lsvtecpwr · 08-02-2007, 11:21 PM

fs; 22" m and h racemasters mounted on gunmetal 13" lensos both brand new need gone asap $600 email bhughett@utk.edu located in middle TN

RedheadRacing · 08-03-2007, 07:06 AM

*B18C5 JDM 1.8L 4 cylinder 1998 Spec sleeved out to a 2.0L 11.8:1 Compression wisco pistons
*stock JDM ITR transmission with JDM LSD
* Spoon Sport Magnetic drain plugs
* King Motorsports Head Job, 3 Angle valve job, Hot Tank, Port and Polish
* Skunk2 Stage 3 cams
* Skunk2 valve train
* R/C 550cc injectors with resistor box
* Bored out Throttle body by King Motorsports
* Port Matched Intake Manifold by King Motorsports
* Hondata S200 ECU tuned by King Motorsports
* RMF header
* remote oil filter out
* Unorthodox Racing crank pulley
* Clutchmasters lightened Flywheel
* AEM fuel pressure riser
* Mugen Oil Pan
* Comptech Ice Box / Intake
* Exedy organic clutch
* Custom harness
There is 6 races on the motor. It is in great shape.

I am asking $7k plus shipping OBO.

Or I will trade for a bike. I would like a Honda preferably. I would consider a sport bike or a cruiser.

The motor is located in WI.

Shawn 608-576-1015
shawn@redheadracing.net

REKOX13 · 08-03-2007, 08:13 AM

Skunk2 Stage 2 Cams - less then 3k miles - $350 obo

RC 310 injectors and Clips - less then 1k miles - $230

B18c Crank - 44k miles $90 obo

GSR Cams and gears - Off a 2000 b18c1, 88k miles - $75 obo

All Parts are in Orange County CA....

Trades are welcome,

All Parts are in Orange County CA....

Trades are welcome,

RPRacing · 08-03-2007, 09:03 AM

1) Eagle Crank - Brand New. 95mm Stroker crank with B Series Journals. This is still in the original packaging and only taken out to inspect and take pictures of. $500obo

2) Crower Rods - Used. For LS/B20. Inspected. All within factory limits. They are the 4340 Steel Billet Rods as seen here . I want $300obo

3) Moroso Oil Pan and Oil Pickup - Used. For all B series. This is the Aluminum one as seem here. 300obo

4) Skunk 2 Pro Series Cams - Used. Skunk 2 Pro Series 1+ Cams. These are a set from my old race motor. They were used for a season of racing and still are awesome cams. I upgraded to bigger cams. They Fit all B series VTEC motors. $500

5) Skunk 2 Cams - Used. Skunk 2 Stage 3 Cams. These are a set that I picked up to test on my race motor. I havent tested yet, but i've seen other's graphs and what they can do. I dont need to use these. They Fit all B series VTEC motors. $500

6) Skunk 2 Cam Gears - Used. Not Pro Series. These are the Annodized Blue Cam gears. They fit All B series and H23 motors. $140.

7) Ported ITR Head - Used. I'm selling my spare Race head. This head is from the owner of Velocity Trends down in Florida. It is hand ported and came off a motor that made 255whp. It comes with Skunk 2 Valves, Ferrea Valve Springs, and all internals and cam caps. $1200

8) Oil Pan - Used. Fits ITR and GSR Motors. Great condition. no dents. $75

9) ACL Race Rod Bearings - BRAND NEW. Part # 4B1946H-STD. These are brand new in the box. These are the uncoated version which help to get more accurate clearances.They are my spare set. Fits B16a, B18a/b and B20. $70obo

10) ACT Clutch - Used. Fits 90-91 B Series. Unsprung 6 puck clutch with Stock pressure Plate. $75

11)ACL Rod Bearings - BRAND NEW. Part # 4B1936-STD. These are brand new in the box. I did not need them for the customer and have had them since. Fits H22 (small main) $40obo

12) ACL Rod Bearings - BRAND NEW. Part # 4B1925-STD. These are brand new in the box. I did not need them for the customer and have had them since. Fits B16a, B18a/b and B20. $40obo

13) ACL Main Bearings - BRAND NEW. Part # 5M1937-STD. These are brand new in the box. I did not need them for the customer and have had them since. Fits H22 (small main) $50obo

14) ITR Pistons. - Used. I Have 2 standard bore JDM ITR Pistons (p73-00). They are in good condition. $20 per piston

15) B16 Piston - Used. I have a standard bore B16 Piston (p30). It is in good condition. $20

16) GSR Rods/Pistons - Used. I have a set of GSR Rods/Pistons. Rods are in awesome shape and so are 3 of the pistons. One piston is shot and needs to be replaced. USDM (P72-A0). $50

17) ITR Piston on GSR Rod - Used. I have a standard bore USDM ITR Piston (p73-a0) on a GSR Rod (p72). It is in good condition. $40

18) JDM ITR Rods/Pistons - Used. I have a set of JDM ITR Rods/Pistons. Rods are in good shape and so are the pistons. JDM (P73-00). I have 2 sets of these. $100per set. 1 SET SOLD

19) JDM ITR Rods - Used. I have 2 JDM ITR Rods/Pistons. The Pistons are broken, but the rods/bolts are still great. $20each

b19coupe · 08-03-2007, 10:09 AM

RC 440cc Injectors-Freshly cleaned and inspected by RC-$250
ATI Super Damper for B series motors-$100
AEM Universal fuel pressure regulator-$100
AEM Honda/Acura fuel pressure regulator-$100
Phantom Grip Super Light Rocker Arms (eliminate VTEC)-$300
JG Sheetmetal intake manifold for B16/ITR heads-(drag race)-$300
Crower 405A LS cams-$300
Hondata intake gaskets-One LS one B16-$25 each

Smoothy · 08-03-2007, 11:01 AM

WTB
Need an intake manifold for a NA GSR. I don't want any sheet metal intake manifold or Victor X or any other forced induction manifolds.

Please PM me with what you got and a price or post here. I have some things to trade if ynecessary.

 FOR SALE
NEW Endyn Wiseco Rollerwave pistons $315 shipped
The pistons are brand new with box with rings, pins and locks. I picked them up in another purchase. I believe the CR is with a B20 block and either B16 or B18C1 head. 84.5mm 12.8~13.1:1 CR

82mm USDM ITR pistons and pins, no rings. Brand new, installed but never used. $100 shipped

Eagle rods. All are in fine condition. Some surface rust because they are not bathing in oil.
Either set of Eagle rods, GSR or LS, $215 shipped.

NEW B18C headgasket $40.00 shipped

NEW B18B headgasket $40.00 shipped

NEW B18C timing belt $30.00 shipped

Modified by Smoothy at 3:23 PM 8/3/2007

fastlifemotorsports · 08-04-2007, 02:39 PM

about 7k of drive time

Cams in great shape.

selling dirt cheap to clean my storage out

You got Hondata, I'll even throw in a base map to help get you to the dyno!!!!!!

PM for price and you won't be disappointed

dblock2x · 08-04-2007, 06:20 PM

AP1 S2k Throttle body (same size as ITR 62mm) $175obo

OBD2 B18B1 Dizzy - (missing plugs) $30
OBD1 B18B1 Dizzy - $40
OBD2 B18B1 Intake Manifold - $40
MSD RPM switch - $20
1999 GSR gearsets;shifter mechanism; reverse gear and selectors; Upper Mainshaft bearing; Mint dog teeth & Shift forks; No 3-4 synchro and 3-4 Slider. $125obo

SL4 RC 370's $150obo

Mr.Milton · 08-05-2007, 02:43 PM

WTB: B20 short block ASAP

JDM JEFFREY · 08-05-2007, 06:57 PM

2000 usdm itr cams pm for pics
250.00 +shipping
will trade for rc 440cc injectors for 92 to 95 civic

VRD^sam · 08-06-2007, 11:38 PM

FS:

Bare B16a2 Block with mains/Crank...$150.00shipped
DSM 450cc Injectors w/clips and resistors...$110.00shipped
Brand New b18B Timing Belt...$35.00shipped
New ARP B18B Head Studs...$90.00shipped
Walbro 255 Fuel Pump...$80.00shipped
Bare B16a2 Intake Manifold w/Throttle body...$30.00shipped
Comp Clutch Sprung 6puck w/2k & Pressure plate...$200.00shipped
ACT Street 12lb Flywheel w/2k...$200.00shipped

WTB:

JE pistons Must be Standard bore 81mm *NEW OR USED*
Cable B-series Tranny *MUST BE MINT*
B-series into EF Mounts *NEW OR USED*
Cable B-series Shift Linkage
OBD0 Alternator
OBD0 Starter

Modified by VRD^sam at 3:28 AM 8/8/2007

allmotorh22 · 08-07-2007, 11:43 AM

wtb:k20 bare block and head

eg_h22 · 08-07-2007, 12:52 PM

WTB: H22 Blox B cams ASAP

EXRex · 08-07-2007, 03:00 PM

WTB - cable GSR trans or cable lsd b16 trans

REKOX13 · 08-07-2007, 03:26 PM

p73 type R pistons for sale

Brand Spanking new in the box with pins.

.25 oversized

$150

trades welcome

So CAL

JDM JEFFREY · 08-07-2007, 10:22 PM

need twm itbs for h22

Broken Gearbox · 08-07-2007, 10:57 PM

FS: h23a crank with caps best offer.

MHBb16CRX · 08-08-2007, 08:48 PM

WTB

I want to buy Individual throttle bodies Off a AE111, 4age engine. PM me with what you got.

Thanks

delacampos · 08-08-2007, 10:48 PM

FS/FT: AN-R b-series header

http://www.honda-tech.com/zerothread?id=2065592

DxTrix · 08-09-2007, 06:12 PM

Fs Lsvtec swap
B16 head, b18b block, gsr trans
http://www.honda-tech.com/zerothread?id=1913892

kevinz · 08-11-2007, 06:58 PM

WTB:Weld Magnum (4x100) 13x8 rims w/ or w/o tires.

07-30-2007, 07:04 PM	#2
ghettocrxsi Member Join Date: Jul 2002 Location: Or e gun, usa Posts: 1,163	jg header with 3" race pipe I have a brand new jg header with the factory collector and is ceramic coated, I also have the 3" race pipe for use at the track. The race pipe is used but the header is brand new. Make offer$$$ I also have a zeitronix wideband with lcd display with all the sensors, egt,boost,wideband and seriel cable. This is the best wideband out there! Make offer$$$ Been used for 3 track pulls with 92 octane gas __________________ Current Ride 2007 mugen top s2k

08-02-2007, 10:36 AM	#3
M!lly Member Join Date: Mar 2004 Location: memphis, TN, USA Posts: 1,037	FS: GSR transmisson open diff about 90k with no grinds $550 obo Modified by M!nes at 10:52 PM 8/5/2007 __________________ Taffeta White 2000 Civic EX

08-02-2007, 05:38 PM	#4
shrums-EG6 Member Join Date: Feb 2006 Location: lost in cali, usa Posts: 1,658	Re: portflow gsr head with bc5's, perforemer x with tb for sale is a gsr head worked on by portflow with supertech valve springs and retainers supertech flat faced valves buddy club spec 5 cams bdl camgears in silver head has less than 2 miles just used for 2 hours on the dyno their is nothing wrong with the head its in perfect condition MAKE AN OFFER AND PLEASE DONT LOW BALL ME performer x manifold portmached to a gsr head by portflow comes with 70mm tb was used witht he gsr head less than 2 miles on it 500 firm PM ME IF INTERESTED WILL SHIP AT BUYERS EXPENSE

08-02-2007, 11:21 PM	#5
lsvtecpwr Junior Member Join Date: Apr 2006 Location: knoxville, tn, us Posts: 62	slicks and wheels fs; 22" m and h racemasters mounted on gunmetal 13" lensos both brand new need gone asap $600 email bhughett@utk.edu located in middle TN

08-03-2007, 07:06 AM	#6
RedheadRacing Member Join Date: Dec 2000 Location: Mt. Horeb, WI, United States Posts: 2,002	Re: (4sd4dr) B18C5 JDM 1.8L 4 cylinder 1998 Spec sleeved out to a 2.0L 11.8:1 Compression wisco pistons stock JDM ITR transmission with JDM LSD * Spoon Sport Magnetic drain plugs * King Motorsports Head Job, 3 Angle valve job, Hot Tank, Port and Polish * Skunk2 Stage 3 cams * Skunk2 valve train * R/C 550cc injectors with resistor box * Bored out Throttle body by King Motorsports * Port Matched Intake Manifold by King Motorsports * Hondata S200 ECU tuned by King Motorsports * RMF header * remote oil filter out * Unorthodox Racing crank pulley * Clutchmasters lightened Flywheel * AEM fuel pressure riser * Mugen Oil Pan * Comptech Ice Box / Intake * Exedy organic clutch * Custom harness There is 6 races on the motor. It is in great shape. I am asking $7k plus shipping OBO. Or I will trade for a bike. I would like a Honda preferably. I would consider a sport bike or a cruiser. The motor is located in WI. Shawn 608-576-1015 shawn@redheadracing.net __________________ Shawn McLoughlin Phone: 608-576-1015 e-mail: shawn@redheadracing.net AIM: shawn@redheadracing.net

08-03-2007, 08:13 AM	#7
REKOX13 Junior Member Join Date: Sep 2006 Location: ORANGE COUNTY, CA, ORANGE Posts: 881	Re: Shiz for sale Skunk2 Stage 2 Cams - less then 3k miles - $350 obo RC 310 injectors and Clips - less then 1k miles - $230 B18c Crank - 44k miles $90 obo GSR Cams and gears - Off a 2000 b18c1, 88k miles - $75 obo All Parts are in Orange County CA.... Trades are welcome, All Parts are in Orange County CA.... Trades are welcome, __________________ PROJEKT EK sold.....dammit http://is.rely.net/1-92-65076-l-NREc...mLFY3DaZnA.gif Vouches: JdmB16Eg6-GapxGuy-ww evo ix-MikeEM1-Fezzie-Laserjock-Master23-gabebauman-ColMustard-summit-joshcuhz-Rusty Shackleferd-bumsta217-joon joon-grg3135-snowboardgeek1

08-03-2007, 09:03 AM	#8
RPRacing Member Join Date: Jan 2003 Location: Virginia Beach, VA, USA Posts: 4,575	Re: Shiz for sale (REKOX13) 1) Eagle Crank - Brand New. 95mm Stroker crank with B Series Journals. This is still in the original packaging and only taken out to inspect and take pictures of. $500obo 2) Crower Rods - Used. For LS/B20. Inspected. All within factory limits. They are the 4340 Steel Billet Rods as seen here . I want $300obo 3) Moroso Oil Pan and Oil Pickup - Used. For all B series. This is the Aluminum one as seem here. 300obo 4) Skunk 2 Pro Series Cams - Used. Skunk 2 Pro Series 1+ Cams. These are a set from my old race motor. They were used for a season of racing and still are awesome cams. I upgraded to bigger cams. They Fit all B series VTEC motors. $500 5) Skunk 2 Cams - Used. Skunk 2 Stage 3 Cams. These are a set that I picked up to test on my race motor. I havent tested yet, but i've seen other's graphs and what they can do. I dont need to use these. They Fit all B series VTEC motors. $500 6) Skunk 2 Cam Gears - Used. Not Pro Series. These are the Annodized Blue Cam gears. They fit All B series and H23 motors. $140. 7) Ported ITR Head - Used. I'm selling my spare Race head. This head is from the owner of Velocity Trends down in Florida. It is hand ported and came off a motor that made 255whp. It comes with Skunk 2 Valves, Ferrea Valve Springs, and all internals and cam caps. $1200 8) Oil Pan - Used. Fits ITR and GSR Motors. Great condition. no dents. $75 9) ACL Race Rod Bearings - BRAND NEW. Part # 4B1946H-STD. These are brand new in the box. These are the uncoated version which help to get more accurate clearances.They are my spare set. Fits B16a, B18a/b and B20. $70obo 10) ACT Clutch - Used. Fits 90-91 B Series. Unsprung 6 puck clutch with Stock pressure Plate. $75 11)ACL Rod Bearings - BRAND NEW. Part # 4B1936-STD. These are brand new in the box. I did not need them for the customer and have had them since. Fits H22 (small main) $40obo 12) ACL Rod Bearings - BRAND NEW. Part # 4B1925-STD. These are brand new in the box. I did not need them for the customer and have had them since. Fits B16a, B18a/b and B20. $40obo 13) ACL Main Bearings - BRAND NEW. Part # 5M1937-STD. These are brand new in the box. I did not need them for the customer and have had them since. Fits H22 (small main) $50obo 14) ITR Pistons. - Used. I Have 2 standard bore JDM ITR Pistons (p73-00). They are in good condition. $20 per piston 15) B16 Piston - Used. I have a standard bore B16 Piston (p30). It is in good condition. $20 16) GSR Rods/Pistons - Used. I have a set of GSR Rods/Pistons. Rods are in awesome shape and so are 3 of the pistons. One piston is shot and needs to be replaced. USDM (P72-A0). $50 17) ITR Piston on GSR Rod - Used. I have a standard bore USDM ITR Piston (p73-a0) on a GSR Rod (p72). It is in good condition. $40 18) JDM ITR Rods/Pistons - Used. I have a set of JDM ITR Rods/Pistons. Rods are in good shape and so are the pistons. JDM (P73-00). I have 2 sets of these. $100per set. 1 SET SOLD 19) JDM ITR Rods - Used. I have 2 JDM ITR Rods/Pistons. The Pistons are broken, but the rods/bolts are still great. $20each __________________ For Sale - 2001 NHBP ITR w/ JDM Front end 40k miles - $11,500 OBO For Sale - Lots of my old race parts. and just some good other parts

08-03-2007, 10:09 AM	#9
b19coupe Member Join Date: Mar 2002 Location: Southern California, U.S.A. Posts: 9,748	RC 440cc Injectors-Freshly cleaned and inspected by RC-$250 ATI Super Damper for B series motors-$100 AEM Universal fuel pressure regulator-$100 AEM Honda/Acura fuel pressure regulator-$100 Phantom Grip Super Light Rocker Arms (eliminate VTEC)-$300 JG Sheetmetal intake manifold for B16/ITR heads-(drag race)-$300 Crower 405A LS cams-$300 Hondata intake gaskets-One LS one B16-$25 each __________________ Church Automotive Testing RC Saturated 440cc Injectors for B-D-H series for sale!

08-03-2007, 11:01 AM	#10
Smoothy Member Join Date: Feb 2000 Location: MA, USA Posts: 1,942	<FONT SIZE="4"><FONT COLOR="blue"> WTB</FONT></FONT> Need an intake manifold for a NA GSR. I don't want any sheet metal intake manifold or Victor X or any other forced induction manifolds. Please PM me with what you got and a price or post here. I have some things to trade if ynecessary. <FONT SIZE="4"><FONT COLOR="red"> FOR SALE</FONT></FONT> NEW Endyn Wiseco Rollerwave pistons $315 shipped The pistons are brand new with box with rings, pins and locks. I picked them up in another purchase. I believe the CR is with a B20 block and either B16 or B18C1 head. 84.5mm 12.8~13.1:1 CR 82mm USDM ITR pistons and pins, no rings. Brand new, installed but never used. $100 shipped Eagle rods. All are in fine condition. Some surface rust because they are not bathing in oil. Either set of Eagle rods, GSR or LS, $215 shipped. NEW B18C headgasket $40.00 shipped NEW B18B headgasket $40.00 shipped NEW B18C timing belt $30.00 shipped Modified by Smoothy at 3:23 PM 8/3/2007 __________________ VOUCH THREAD: http://www.honda-tech.com/zerothread?id=635147

08-04-2007, 02:39 PM	#11
fastlifemotorsports Junior Member Join Date: Apr 2004 Location: Ridgeland, MS, usa Posts: 130	FS:Toda Spec B cams w/ Hondata base map for your set up about 7k of drive time Cams in great shape. selling dirt cheap to clean my storage out You got Hondata, I'll even throw in a base map to help get you to the dyno!!!!!! PM for price and you won't be disappointed __________________ VOUCHES: http://images.honda-tech.com/set1/smile/emthup.gif Lightning Motorsports http://images.honda-tech.com/set1/smile/emthup.gif 00Red_SiR http://images.honda-tech.com/set1/smile/emthup.gif pnthr30

08-04-2007, 06:20 PM	#12
dblock2x Join Date: Nov 2005 Posts: 367	Re: FS:Toda Spec B cams w/ Hondata base map for your set up (fastlifemotorsports) AP1 S2k Throttle body (same size as ITR 62mm) $175obo OBD2 B18B1 Dizzy - (missing plugs) $30 OBD1 B18B1 Dizzy - $40 OBD2 B18B1 Intake Manifold - $40 MSD RPM switch - $20 1999 GSR gearsets;shifter mechanism; reverse gear and selectors; Upper Mainshaft bearing; Mint dog teeth & Shift forks; No 3-4 synchro and 3-4 Slider. $125obo SL4 RC 370's $150obo

08-05-2007, 02:43 PM	#13
Mr.Milton Member Join Date: Feb 2007 Location: Los Angeles, CA, USA Posts: 3,141	Re: (neo_) WTB: B20 short block ASAP __________________ "You Shut you're mouth, when you talk to me!" H2B DC2:DD

08-05-2007, 06:57 PM	#14
JDM JEFFREY Member Join Date: Dec 2004 Location: KING OF THE COAST, Oregon Posts: 1,811	2000 usdm itr cams pm for pics 250.00 +shipping will trade for rc 440cc injectors for 92 to 95 civic __________________ (89.5x97h2b)286whp214tq 11:54@115 fastest allmotor street car in OR POWERED BY PARRIS RACE ENGINES project 300+ coming soon

08-06-2007, 11:38 PM	#15
VRD^sam Senior Member Join Date: Oct 2004 Location: Fobba, MN Posts: 11,477	Re: (JDM JEFFREY) FS: Bare B16a2 Block with mains/Crank...$150.00shipped DSM 450cc Injectors w/clips and resistors...$110.00shipped Brand New b18B Timing Belt...$35.00shipped New ARP B18B Head Studs...$90.00shipped Walbro 255 Fuel Pump...$80.00shipped Bare B16a2 Intake Manifold w/Throttle body...$30.00shipped Comp Clutch Sprung 6puck w/2k & Pressure plate...$200.00shipped ACT Street 12lb Flywheel w/2k...$200.00shipped WTB: JE pistons Must be Standard bore 81mm NEW OR USED Cable B-series Tranny MUST BE MINT B-series into EF Mounts NEW OR USED Cable B-series Shift Linkage OBD0 Alternator OBD0 Starter Modified by VRD^sam at 3:28 AM 8/8/2007

08-07-2007, 11:43 AM	#16
allmotorh22 Junior Member Join Date: Dec 2004 Location: gainesville, Va, united states Posts: 873	Re: (VRD^sam) wtb:k20 bare block and head __________________ vouches: REEMB18C1, starcraftbw, Turbo-GSR1287, whoneedzvtec, MardreRacing, Dave F BIG FISH TUNING --getcha some!!!!!!!

08-07-2007, 12:52 PM	#17
eg_h22 Junior Member Join Date: Apr 2006 Location: Beautiful beaches, skies, and ladies. No worries(.) @ the OBX, NC Posts: 383	WTB: H22 Blox B cams ASAP __________________ 95 championship white h22 ej2 "A Mouse Is An Elephant Built By The Japanese"

08-07-2007, 03:00 PM	#18
EXRex Junior Member Join Date: Mar 2005 Location: san antonio, florida, United States Posts: 29	WTB - cable GSR trans or cable lsd b16 trans

08-07-2007, 03:26 PM	#19
REKOX13 Junior Member Join Date: Sep 2006 Location: ORANGE COUNTY, CA, ORANGE Posts: 881	Type R Pisssstons p73 type R pistons for sale Brand Spanking new in the box with pins. .25 oversized $150 trades welcome So CAL __________________ PROJEKT EK sold.....dammit http://is.rely.net/1-92-65076-l-NREc...mLFY3DaZnA.gif Vouches: JdmB16Eg6-GapxGuy-ww evo ix-MikeEM1-Fezzie-Laserjock-Master23-gabebauman-ColMustard-summit-joshcuhz-Rusty Shackleferd-bumsta217-joon joon-grg3135-snowboardgeek1

08-07-2007, 10:22 PM	#20
JDM JEFFREY Member Join Date: Dec 2004 Location: KING OF THE COAST, Oregon Posts: 1,811	need twm itbs for h22 __________________ (89.5x97h2b)286whp214tq 11:54@115 fastest allmotor street car in OR POWERED BY PARRIS RACE ENGINES project 300+ coming soon

08-07-2007, 10:57 PM	#21
Broken Gearbox Member Join Date: Oct 2002 Location: Search Harder Posts: 3,676	FS: h23a crank with caps best offer. __________________ TheBetterSol = SCAMMER

08-08-2007, 08:48 PM	#22
MHBb16CRX Junior Member Join Date: Oct 2006 Location: Tampa, FL, USA Posts: 108	WTB WTB I want to buy Individual throttle bodies Off a AE111, 4age engine. PM me with what you got. Thanks

08-08-2007, 10:48 PM	#23
delacampos Junior Member Join Date: Jan 2002 Location: south, texas Posts: 689	FS/FT: AN-R b-series header http://www.honda-tech.com/zerothread?id=2065592 __________________ lick my balls....

08-09-2007, 06:12 PM	#24
DxTrix Member Join Date: Sep 2002 Location: Team SpeedTrix, Ca, USA Posts: 6,101	Re: (delacampos) Fs Lsvtec swap B16 head, b18b block, gsr trans http://www.honda-tech.com/zerothread?id=1913892 __________________ Good Sellers: TurboLSVtecTeg ninetyfourgsr AMS Mike drunknbass TGARCIARACING vtecb20coupe backdraft EM1Michael3589 <FONT COLOR="blue">vouch: TurboEG6 djfob xsellxoutx hartlessek AMS Mike ozzyman slowazzhatch tyflip2 hummmonmynutzzz garcia-racing kptrulee redb16coupe mkw1 KillerAccord</FONT>

08-11-2007, 06:58 PM	#25
kevinz Junior Member Join Date: Sep 2005 Location: Md, USA Posts: 186	Re: (delacampos) WTB:Weld Magnum (4x100) 13x8 rims w/ or w/o tires. __________________ http://www.JDMCARS.com http://www.justiceracingengines.com/

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search