Is this an SC61?
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2003
Location: Canada, Canada
Posts: 796
Likes: 0
Received 0 Likes
on
0 Posts
Is this an SC61?
Hey guys I just bought this turbo.. DOnt know exactly what it is. Says precision and A/R .60 and .63. Is it a SC61? Also I am new to turbos, do I just play with the wheel to check for shaft play? All fins and everything look great with no marks or scraps of any kind.
http://photobucket.com/albums/a299/huge230/turbo/
http://photobucket.com/albums/a299/huge230/turbo/
#2
Junior Member
Join Date: Aug 2004
Location: Copperas Cove, TX
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is this an SC61? (huge230)
See the number inscribed on the compressor housing, near the outlet. You can almost make it out in your second pic.
What does it say?
What does it say?
#4
Re: Is this an SC61? (huge230)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by huge230 »</TD></TR><TR><TD CLASS="quote">its 5031E
SC50?</TD></TR></TABLE>
did u think it was an sc61?
SC50?</TD></TR></TABLE>
did u think it was an sc61?
#5
Honda-Tech Member
Thread Starter
Join Date: Oct 2003
Location: Canada, Canada
Posts: 796
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is this an SC61? (LSTEG96)
well I didnt see that number until it was pointed out to me, sorry
How do I tell what condition it is in? It seams to have a little side to side play but no in and out
How do I tell what condition it is in? It seams to have a little side to side play but no in and out
#7
Honda-Tech Member
Thread Starter
Join Date: Oct 2003
Location: Canada, Canada
Posts: 796
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is this an SC61? (LSTEG96)
ok thanks. I plan on putting this on a H22, I am not looking for much in terms of horsepower. I know there are many factors but what would 8 PSI be like I wonder? And Im guessing 8PSI wont be real hard on the turbo as well
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: Oct 2003
Location: Canada, Canada
Posts: 796
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is this an SC61? (LSTEG96)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LSTEG96 »</TD></TR><TR><TD CLASS="quote">well that things going to spoool like mad.... dont know about power though</TD></TR></TABLE>
From searching thats what im afraid of
Any have or know of anyone witha SC50 on a h22?
From searching thats what im afraid of
Any have or know of anyone witha SC50 on a h22?
#11
Honda-Tech Member
Thread Starter
Join Date: Oct 2003
Location: Canada, Canada
Posts: 796
Likes: 0
Received 0 Likes
on
0 Posts
Re: (turbosnatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbosnatch »</TD></TR><TR><TD CLASS="quote">you will be fine, dont worry </TD></TR></TABLE>
Ok any idea what 8PSI would Yield. I want less than 300whp. Im guessing id be fine with 8
Ok any idea what 8PSI would Yield. I want less than 300whp. Im guessing id be fine with 8
Thread
Thread Starter
Forum
Replies
Last Post
spoolin turbo s
Forced Induction
6
08-27-2008 10:19 PM
dnbruut
Forced Induction
5
07-08-2005 07:57 AM