Got my ES mounts for my 90 integra rs But I have a questions- Pics!
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2004
Location: Hill town, TN, USA
Posts: 4,860
Likes: 0
Received 0 Likes
on
0 Posts
Got my ES mounts for my 90 integra rs But I have a questions- Pics!
Hey guys whats up,
I got my ES Motor mounts because my upper left motor mount is broken
So I just have a question.
Do I hammer the old rubber mount out? and just put these in?
Cuz I thought these replace the oem rubber inserts
While it looks like the ES motor mount inserts looks likes I put them in <U>with</U> the oem rubber motor mount
but mine is broken, so Would it be ok to install these with the broken oem mount if that's the way it needs to be done??
Do I need the OEM Rubber mount to install these? or can I hammer it out and just put these in,
Here are some pics,
This is the one that is gone bad....
This kit also replaces this one too right...
And this rear mount behind the motor...
Thanks, Later
I got my ES Motor mounts because my upper left motor mount is broken
So I just have a question.
Do I hammer the old rubber mount out? and just put these in?
Cuz I thought these replace the oem rubber inserts
While it looks like the ES motor mount inserts looks likes I put them in <U>with</U> the oem rubber motor mount
but mine is broken, so Would it be ok to install these with the broken oem mount if that's the way it needs to be done??
Do I need the OEM Rubber mount to install these? or can I hammer it out and just put these in,
Here are some pics,
This is the one that is gone bad....
This kit also replaces this one too right...
And this rear mount behind the motor...
Thanks, Later
#2
Honda-Tech Member
Join Date: Oct 2003
Location: Nor Cal
Posts: 3,415
Likes: 0
Received 0 Likes
on
0 Posts
ES doesnt come with upper mount inserts
it tourqe mounts
aka
front tranny
and rear engine
driverside mount THERE ARE no es inserts
for that u gotta go with prothane
to install es inserts u dont hammer anything out
u wedge 2 inserts on both sides and zip tie em together
it tourqe mounts
aka
front tranny
and rear engine
driverside mount THERE ARE no es inserts
for that u gotta go with prothane
to install es inserts u dont hammer anything out
u wedge 2 inserts on both sides and zip tie em together
#3
Honda-Tech Member
Join Date: Jul 2004
Location: where knowledge is horsepower
Posts: 1,813
Likes: 0
Received 0 Likes
on
0 Posts
Re: (importdude2000)
I would suggest using only the front ones. The rear mount is very difficult to get off, I gave up on it. The front two inserts are very easy to do and do make a significant difference
#4
Honda-Tech Member
Thread Starter
Join Date: Jul 2004
Location: Hill town, TN, USA
Posts: 4,860
Likes: 0
Received 0 Likes
on
0 Posts
Re: (ProjectDarkBlack)
Ok, So this is for the front engine mount, the rear engine mount,
and the mount above the tranny?
This sucks, Where can I get the inserts for the upper mount That I have broken,
I'll get a mount from the junkyard
Ok thanks,
Also, I'l do the rear engine mount becuase,
I have to drop the tranny to install my Aasco 8lb flywheel
Might as well and tame the time to do it right
and the mount above the tranny?
This sucks, Where can I get the inserts for the upper mount That I have broken,
I'll get a mount from the junkyard
Ok thanks,
Also, I'l do the rear engine mount becuase,
I have to drop the tranny to install my Aasco 8lb flywheel
Might as well and tame the time to do it right
#7
Junior Member
Join Date: Apr 2005
Location: M, MN, USA
Posts: 848
Likes: 0
Received 0 Likes
on
0 Posts
Re: Got my ES mounts for my 90 integra rs But I have a questions- Pics! (90DA-Pedro)
plently of people make that upper mount, but they are usually a bit of money, and might come in a kit with the other mounts. Like Hassport and all the copy designs on ebay
Trending Topics
#8
Member
Join Date: Jul 2003
Location: Sparks, NV, USA
Posts: 1,948
Likes: 0
Received 0 Likes
on
0 Posts
Re: Got my ES mounts for my 90 integra rs But I have a questions- Pics! (BlackLudeSi)
I believe Prothane has the 2 top mounts. I think they have to pressed out and the new ones pressed in.
#9
Honda-Tech Member
Join Date: Oct 2003
Location: Nor Cal
Posts: 3,415
Likes: 0
Received 0 Likes
on
0 Posts
Re: (importdude2000)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by importdude2000 »</TD></TR><TR><TD CLASS="quote">ES doesnt come with upper mount inserts
it tourqe mounts
aka
front tranny
and rear engine
<U>driverside mount THERE ARE no es inserts
for that u gotta go with prothane</U>to install es inserts u dont hammer anything out
u wedge 2 inserts on both sides and zip tie em together</TD></TR></TABLE>
it tourqe mounts
aka
front tranny
and rear engine
<U>driverside mount THERE ARE no es inserts
for that u gotta go with prothane</U>to install es inserts u dont hammer anything out
u wedge 2 inserts on both sides and zip tie em together</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
darcane
Honda Civic (2001 - 2005)
6
08-06-2013 07:07 AM