Should i change my gasket with a new valve cover
08-09-2005, 03:23 PM
#1
Thread Starter
Join Date: Jul 2005
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Should i change my gasket with a new valve cover
i am looking to purchase a new ctr valve cover for my 00si. i heard that it is a good idea to change my head gasket...is this true?..will i need to buy a new gasket?...also i wanted to get some type r headers...i am questioning if my car will pass smog when i put them in...any advice is appreciated
08-09-2005, 03:29 PM
#2
Honda-Tech Member
You do not need to change the head gasket when working on the valve cover... Its wise, however, to change the valve cover gasket. Its not going to hurt, anyway.
Type R header, not plural. You have 1.
They are 2.5" and your cat will need a new flange from 2.25" Whether you'll pass smog or not, depends on the state and ref. Call and check or search the archives for info
Type R header, not plural. You have 1.
They are 2.5" and your cat will need a new flange from 2.25" Whether you'll pass smog or not, depends on the state and ref. Call and check or search the archives for info
08-09-2005, 03:39 PM
#4
Join Date: Apr 2003
Location: Bay Area, CA
Posts: 994
Likes: 0
Received 0 Likes
on
0 Posts
the head gasket is bewteen the head and the block like salami in a sandwhich. if that **** is blown its all bad burn coolant overheats. its recommended to change the valve cover gasket. its this black rubber thing that snakes around the inside of the valve cover.
the jdm itr header is 2.5 the usdm isn't. with the jdm itr header and a good stock cat i believe it should pass smog. this guy i know passed on jdm itr header and a good stock cat.
the jdm itr header is 2.5 the usdm isn't. with the jdm itr header and a good stock cat i believe it should pass smog. this guy i know passed on jdm itr header and a good stock cat.
Thread
Thread Starter
Forum
Replies
Last Post
type Gendy
Honda Civic / Del Sol (1992 - 2000)
10
09-06-2003 10:44 AM