RC injectors
#3
Re: RC injectors (b20b)
There are two types of injectors, saturated and Peak&Hold injectors.
When measured across the injectors with an ohmmeter, you will see either 2-3ohms, low or you will see 12-13ohms, high.
You get the injector type according to which ecu you will be using. The easiest way is to measure the injectors you have now and get the same resistance injectors in your desired size.
When measured across the injectors with an ohmmeter, you will see either 2-3ohms, low or you will see 12-13ohms, high.
You get the injector type according to which ecu you will be using. The easiest way is to measure the injectors you have now and get the same resistance injectors in your desired size.
Thread
Thread Starter
Forum
Replies
Last Post