HELP! Wheel Stud's broke...
04-25-2005, 08:59 PM
#1
Thread Starter
Join Date: Feb 2005
Location: Mill Creek, WA, USA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
HELP! Wheel Stud's broke...
3 of my 4 wheel studs broke. I can't get the wheel studs out because the knuckle is blocking the bolt. How complicated is it to remove the front hub? Is there a way to remove the wheel studs without removing the hub?
04-25-2005, 09:04 PM
#2
Honda-Tech Member
04-25-2005, 11:57 PM
#4
Honda-Tech Member
Re: HELP! Wheel Stud's broke... (SeattleBoy)
You don't need a press either, you can use a slide hammer. I have done several and never ever had a bearing problem afterwards. As long as your know what your doing, you will be fine.
04-26-2005, 07:02 AM
#6
Honda-Tech Member
Re: HELP! Wheel Stud's broke... (Carparts-Auction.com)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Carparts-Auction.com »</TD></TR><TR><TD CLASS="quote">holy crap, may I ask how that happened?</TD></TR></TABLE>
if the lug nuts are not tight there is A LOT of pressure on the studs... if one goes, more pressure on the others... and so on.
if the lug nuts are not tight there is A LOT of pressure on the studs... if one goes, more pressure on the others... and so on.
Thread
Thread Starter
Forum
Replies
Last Post
jdmtodadc2
Acura RSX DC5 & Honda Civic EP3
3
08-26-2012 01:21 PM
Hulk_EJ8
Honda Civic / Del Sol (1992 - 2000)
2
11-15-2005 01:59 AM
Tokyo_X-treme_Racer
Honda Civic / Del Sol (1992 - 2000)
3
07-20-2004 08:10 AM
