CimorelliCRX

My freind has an old carbuerated 85 accord(poo pooer). Now the thing runs, but it wont idle, carburater is bad. So what we were thinking about doing is going to a junkyard and getting a fuel injected manifold. But the thing is we are not sure how easy it will swap in. All the thousands of vacum lines, and what not. I am sure we will need:
New manifold
ECU from fuel injected accord
New vacums

Does anyone know a website that has this full setup on there, or how easy or hard this would be. I think however hard it is we could do it, I just swapped a ZC into my CRX and had to do some wiring, due to DX to ZC and what not. Any help would be appreciated. Thanks.

CimorelliCRX

No one has any idea how to switch from Carberated to Fuel Injected?

smokin rubber

nope. why not just get a whole new engine. those old things should be cheap. btw there arent a whole lot of older (carbed) accords here

89_LXi

Ya I agree it might be easier to just get another engine, but if you want to try, Carotman is probably the guy you want to talk to. His AIM s/n is "TheCarotman". It wasn't on a 2nd gen, but he did a carb to EFI swap on a 3rd gen.

Check out his website
http://pages.infinit.net/omus/eficonversion/efi.html
http://86-89accord.com/ezboard/EFI/EFIconversion.htm

Good Luck!