HEAD BOLT LOOSENING AND TIGHTENING SEQUENCE
03-26-2005, 07:14 AM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2004
Location: Aurora, CO
Posts: 1,215
Likes: 0
Received 0 Likes
on
0 Posts
HEAD BOLT LOOSENING AND TIGHTENING SEQUENCE
Unfortunately I left my Haynes manual back at work, and I'm wondering if there is a link, or somebody has a diagram for loosening and tightening sequences for a 94 Civic 1.6 SOHC VTEC engine? 
03-26-2005, 07:22 AM
#2
Re: HEAD BOLT LOOSENING AND TIGHTENING SEQUENCE (rfoster03)
Dont have a diagram I can find, but its like this...imagine with me.
Intake side you have five bolts from left to right it would go 9, 3, 1, 5, 7
Exhaust side you have five bolts from left to right it would go 8, 6, 2, 4, 10
Does this make sence?
Intake side you have five bolts from left to right it would go 9, 3, 1, 5, 7
Exhaust side you have five bolts from left to right it would go 8, 6, 2, 4, 10
Does this make sence?
Thread
Thread Starter
Forum
Replies
Last Post
JG Luder
Honda Prelude
8
02-04-2002 11:52 AM
