Metal Stamp
#1
Junior Member
Thread Starter
Join Date: Dec 2003
Location: Hatfield, PA
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Metal Stamp
Just wondering if anyone knows where I can get a metal stamp with my company logo on it, so I can stamp little plates and weld them onto my products. Im could draw the logo in CAD and have a machine shop make one I guess. Thought Id ask to see if anyone has purchased something like this.
#2
OG Fabricator
Join Date: Mar 2003
Location: Knoxville, tn, 37912
Posts: 1,438
Likes: 0
Received 0 Likes
on
0 Posts
Re: Metal Stamp (jmckeone)
The problem with a stamp is that your stamp must be either small like one or twon letters, or has to be contoured to fit the part, or can only be used in flat spots....and even then it won't always turn out just right.
you may be better off to have a shop machine a small logo cutout, or design in a piece that you can then tack to your product.
Or you can try etching it by making one cutout, or a few extra ones... put them over your part and then bead blasting it... basically like a stencil.
you may be better off to have a shop machine a small logo cutout, or design in a piece that you can then tack to your product.
Or you can try etching it by making one cutout, or a few extra ones... put them over your part and then bead blasting it... basically like a stencil.
Thread
Thread Starter
Forum
Replies
Last Post
koolmoedee5
Welding / Fabrication
3
12-18-2004 08:38 PM