Troubleshooting no start... whats next???
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2012
Location: Central Florida/N.FL
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Troubleshooting no start... whats next???
So for some time, I have had to jump my starter or get a push start to get my engine running. Ive been annoyed enough to attempt to fix it, but need some help. I have never used a multimeter or done any electrical troubleshooting but am eager to learn.
Car is a 2000 integra ls with a k20a2 I got on a decent trade, and also has an alarm system.
I finally got a test light, and multimeter, and saw some youtube videos.
I got a faint light to the starter solenoid, and one time only, the multimeter read close to 6v on starter solenoid. All the rest of the times it only read at .03v.
Now that we have ruled out the starter isn't bad, whats the next step. How do I troubleshoot if it is the ignition switch or neutral safety switch? Any help is appreciated.
Car is a 2000 integra ls with a k20a2 I got on a decent trade, and also has an alarm system.
I finally got a test light, and multimeter, and saw some youtube videos.
I got a faint light to the starter solenoid, and one time only, the multimeter read close to 6v on starter solenoid. All the rest of the times it only read at .03v.
Now that we have ruled out the starter isn't bad, whats the next step. How do I troubleshoot if it is the ignition switch or neutral safety switch? Any help is appreciated.
#2
Honda-Tech Member
Thread Starter
Join Date: Jul 2012
Location: Central Florida/N.FL
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Re: Troubleshooting no start... whats next???
also... main relay was switched with a known working one. fuel pump primes. k pro says ignition is on when in II
Thread
Thread Starter
Forum
Replies
Last Post
GoodSkoolRevltn
Acura Integra
4
08-30-2014 05:52 PM
efhondaracer27
Honda CRX / EF Civic (1988 - 1991)
4
01-21-2010 10:32 AM
Circuit Star-29
Acura Integra
17
07-19-2005 10:57 PM