Notices
Road Racing / Autocross & Time Attack Road Racing / AUTOX, HPDE, Time Attack

FS: Race Parts or Supplies

Thread Tools
 
Search this Thread
 
Old 07-01-2014, 11:13 PM
  #176  
Honda-Tech Member
 
mugen boy's Avatar
 
Join Date: Apr 2003
Location: Buena Park or Fullerton, CA, USA
Posts: 2,918
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Race Parts or Supplies

Rotora big brake kit 4 piston caliper and two piece rotor, this is a s2000 rear setup that was a prototype and I was gonna convert it to a front brake setup but never got around to it so now it's for sale, I'm asking $1600 obo and I mean or best offer or willing to trade for buckets rims or what ever, I own a Ek and a ap2 so I'm open to trades, mostly looking for parts for my s2000.



Also for sell are my Tein basics, I'm asking $440 obo probably 14k on them for ek<br /><br />
Modified by mugen boy at 12:06 AM 12/9/2013<br /><br />
Modified by mugen boy at 2:49 PM 5/14/2014
Old 07-02-2014, 12:49 AM
  #177  
Honda-Tech Member
iTrader: (2)
 
BlueTeg's Avatar
 
Join Date: Aug 2002
Location: Margaritaville, AZ, US
Posts: 3,235
Likes: 0
Received 1 Like on 1 Post
Default FS: ITR LSD (limited slip differential)

sold

Last edited by BlueTeg; 07-07-2014 at 11:31 PM.
Old 07-02-2014, 07:19 AM
  #178  
Spongebrad Squarepants
iTrader: (2)
 
Egezzy's Avatar
 
Join Date: Feb 2004
Location: #BrapCity
Posts: 10,456
Likes: 0
Received 0 Likes on 0 Posts
Default

For Sale, my Koni Race set up, ITR spec. They will come with HyperCo springs 800/1100, although I've never ran these that stiff. Also, ITR LCAs are included. 1150 shipped. Pending.


Last edited by Egezzy; 07-04-2014 at 07:26 AM.
Old 07-07-2014, 11:33 PM
  #179  
Honda-Tech Member
iTrader: (2)
 
BlueTeg's Avatar
 
Join Date: Aug 2002
Location: Margaritaville, AZ, US
Posts: 3,235
Likes: 0
Received 1 Like on 1 Post
Default FS: 225/45/15 RA1 tires BRAND NEW

I have a pair (read: quantity of 2) of brand new Toyo RA1 tires (225/45/15) that we're selling. These are street legal, race compound tires. Super sticky. We bought them for use on our Honda Challenge car, but they changed the rules for 2014 and the series now requires us to use a different tire.
****TT drivers: these tires are eligible for contingency dollars from Toyo****

They come brand new at 8/32nds of tread, but they have been shaved down to 4/32nds for the best possible grip. We typically get 25-30 RACE heat cycles on the RA1s when they're shaved. TT drivers will probably see double that before getting to the cords. Much more economical tire to run than Hoosier + a more comprehensive contingency program is a nice bonus too.
These retail for $350 for a full set + $40 for shaving + $30 for shipping or tax, so $420 out the door if you're buying them from a dealer

Asking $280 for pair + $40 for shipping
Or I can deliver to Willow Springs this coming weekend (July 11 - July 13)

Text if interested: 480 two one three 0861
Old 07-08-2014, 11:55 PM
  #180  
Honda-Tech Member
iTrader: (1)
 
10cjennings's Avatar
 
Join Date: Oct 2009
Location: Florida
Posts: 455
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Race Parts or Supplies

Originally Posted by Egezzy
For Sale, my Koni Race set up, ITR spec. They will come with HyperCo springs 800/1100, although I've never ran these that stiff. Also, ITR LCAs are included. 1150 shipped. Pending.[/img]

Did you ell these? I sent you a PM about the springs.
Old 07-14-2014, 11:18 AM
  #181  
Honda-Tech Member
iTrader: (1)
 
Reyes's Avatar
 
Join Date: Nov 2007
Location: progress starts now.
Posts: 1,518
Likes: 0
Received 6 Likes on 5 Posts
Default Re: FS: Race Parts or Supplies

SOLD

Last edited by Reyes; 09-16-2014 at 02:49 PM.
Old 07-17-2014, 11:12 AM
  #182  
Honda-Tech Member
 
powerneedy's Avatar
 
Join Date: Feb 2005
Location: Idaho Falls, Idaho
Posts: 1,190
Likes: 0
Received 2 Likes on 2 Posts
Default Re: FS: Race Parts or Supplies

AEM ems 30-1050 brand new in the box. This is for obd2b Hondas/Acuras or with a jumper harness it can work with obd2a and obd1.

$750

Old 07-17-2014, 06:25 PM
  #183  
Honda-Tech Member
 
pasaunde's Avatar
 
Join Date: Jan 2007
Location: InterWebbs, NC
Posts: 670
Likes: 0
Received 0 Likes on 0 Posts
Icon7 Re: FS: Race Parts or Supplies

B Series Hydro Trans $ 1200 ( STILL AVAILABLE AS OF 8/29/14)
The trans started out as an LS Hydro from a 97 Integra, then I started making changes
I can deliver to Nationals (RA) or locally
Call or txt for more info 704-two three six 9779


Since I've owned it I've replaced:
3/4 Synchro set
3/4 Shift fork
5th Synchro
Internal shift selector

Specs:
JDM 4.785 FD
ITR LSD
GSR/LS 1,2
B16 3,4
GSR 5th
Attached Images    

Last edited by pasaunde; 08-29-2014 at 01:27 PM.
Old 07-23-2014, 09:43 AM
  #184  
Honda-Tech Member
 
96dxB16's Avatar
 
Join Date: Jul 2002
Location: yay area, ca, usa
Posts: 538
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Race Parts or Supplies

SOLD!

Last edited by 96dxB16; 07-28-2014 at 04:35 PM.
Old 07-27-2014, 06:45 AM
  #185  
Honda-Tech Member
iTrader: (3)
 
rice4life's Avatar
 
Join Date: Feb 2002
Location: Carlisle, PA, usa
Posts: 1,534
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Race Parts or Supplies

I have a Buddy Club Racing exhaust for 88-91 CRX for sale. These are very light weight. have about 8K miles on them. Comes with test pipe to fit CRX with B-series swap.

SOLD







Last edited by rice4life; 07-28-2014 at 02:39 PM.
Old 07-27-2014, 05:15 PM
  #186  
Honda-Tech Member
iTrader: (2)
 
89efhatchy's Avatar
 
Join Date: Aug 2004
Posts: 500
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Race Parts or Supplies

FS:

D2 coil overs for eg/dc. Can either come with d2 springs all around with d2's default spring rates or can come with Eibach 1000# rear springs. $600 shipped in US with d2 springs. $650 shipped in US with 1000# springs($140 springs).

ASR 24mm rear sway bar. Made to use with ASR subframe brace but should fit other braces as long as they have the sway bar mounting points. Comes with adjustable end links($80 option). $200 shipped in US.


Old 07-29-2014, 07:29 AM
  #187  
Honda-Tech Member
iTrader: (1)
 
known's Avatar
 
Join Date: Jan 2003
Location: orlando, fl, us
Posts: 1,984
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Race Parts or Supplies

SOLD



email me

Registered on mylaps

Last edited by known; 07-29-2014 at 10:15 AM.
Old 08-11-2014, 01:58 PM
  #188  
Honda-Tech Member
 
Davidss's Avatar
 
Join Date: Mar 2005
Location: DFW, TX
Posts: 476
Likes: 0
Received 1 Like on 1 Post
Default Re: FS: Race Parts or Supplies

Sold.

Last edited by Davidss; 12-15-2014 at 08:47 PM.
Old 08-20-2014, 11:35 AM
  #189  
Honda-Tech Member
 
BWek's Avatar
 
Join Date: Nov 2007
Location: oakville, on
Posts: 107
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Race Parts or Supplies

Spoon 1.5 way Clutch Pack LSD 41000-DC5-000 FOR K20/24 TRANSMISSIONS

The diff is Broken, it needs New Side gears + 4 Pinion gears
New parts from Kaaz usa are, Side gears $154 ea and Pinions are $51 ea

The only reason I'm selling it is I just recently lost my job and need to generate some cash.

I'm Looking for $300Cdn+ shipping. If you are local in the Toronto area I'll rebuild the Diff and Install it in your transmission at no cost. other than the diff parts.





Old 08-22-2014, 02:06 AM
  #190  
Honda-Tech Member
 
hufflepuff's Avatar
 
Join Date: Sep 2012
Location: Washington DC
Posts: 55
Likes: 0
Received 1 Like on 1 Post
Default Re: FS: Race Parts or Supplies



For sale is the 11" brake kit that is a direct bolt-on (no modification) upgrade for many Honda and Acura models, including:

- Acura Integra (all years)
- Honda Civic with 10.3" stock brakes (including most si and ex models)
- Any Honda Civic or CRX that has had a 10.3" spindle swap from a Civic Si/EX or Integra
- Any civic or crx with the use of a fastbrakes adapter bracket

This kit upgrades your front brakes to Integra type R specs and fits almost all 15" wheels. This kit includes the following:

- Used but excellent condition Integra type R (ITR) single piston calipers (one year of use)
- (2) caliper rebuild kits, if they are needed in the future
- Caliper brackets
- BRAND NEW in box 11" rotors
- Stainless steel braided front brake lines, Russel, DOT approved, used for about 2 years, great shape

I have a set of brand new Hawk DTC-60 pads (HB143G.680). These are the correct pads for this kit. The DTC-60 pads are stellar with this setup; long life and great bite. They fit acura TL, NSX, Integra type R, Accord, prelude, CR-V, RL, CL.

Compare to Fastbrakes kit @ $470 and MadFabLab @ $499. Pads go for $194 shipped. Asking $200 for the hardware and $120 for the brand new pads. Package deal for $300.

I'm in the Mid Atlantic region and am willing to deliver to Summit or VIR. I'm also willing to ship at buyer's expense.


EF EG EK DC DA bbk DC2 DA9 DB1 DB2 honda race track hpde nasa scca racing
Old 08-24-2014, 02:04 PM
  #191  
Honda-Tech Member
 
halfakneegrow's Avatar
 
Join Date: Jan 2012
Posts: 137
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Race Parts or Supplies

New My Laps sports timer transponder $275 shipped obo

Obd2 Honda Power Fc with Commander uses only once for 2 days back in 2007 I believe. Looking to get $450 shipped or best offer. Please no lowballers
Attached Images     
Old 08-25-2014, 12:43 PM
  #192  
Honda-Tech Member
 
thabao's Avatar
 
Join Date: Jan 2008
Location: troy, mi, usa
Posts: 612
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Race Parts or Supplies

Buddy Club Race Spec coilovers for EG/DC/EK. No more than 800miles, 400 being track miles. Only selling because I don't have the car any morBuddy Club Race Spec coilovers for EG/DC/EK. No more than 800miles, 400 being track miles. Only selling because I don't have the car any more. Will provide paper work so new owner gets warranty.

PRICE: $1000 shipped

Located in Troy, MI

Old 08-26-2014, 07:27 AM
  #193  
Honda-Tech Member
 
turbodav's Avatar
 
Join Date: Jul 2002
Location: Nashville, tn
Posts: 1,474
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Race Parts or Supplies

sold

Last edited by turbodav; 09-07-2014 at 08:54 AM.
Old 08-29-2014, 06:46 AM
  #194  
Honda-Tech Member
 
Matt_EH3's Avatar
 
Join Date: Aug 2013
Location: Canada
Posts: 251
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Race Parts or Supplies

Schroth Rallye 4 harness. 4 point with ASM anti-submarining technology. Driver side. Used mainly for AutoX. Bolts up to factory belt points. Bought in 2005. Tag says manufactured in 2004 (see pictures).

80$ + shipping from Montreal area, Canada




Old 08-30-2014, 09:44 AM
  #195  
Spongebrad Squarepants
iTrader: (2)
 
Egezzy's Avatar
 
Join Date: Feb 2004
Location: #BrapCity
Posts: 10,456
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Race Parts or Supplies

Injen CAI off of my B swapped Civic. 140 shipped.



Wink 5 panel mirror with a Donkey Bop sticker for added horsepower. 18 shipped.



Tru Cool 24 Row Oil Cooler kit. I never installed it, planned on running it, but decided not to. Here is the post from the ITRca member that I bought it from. I paid 225 for this, I'm wanting to get that out of it, but will to take Best Offer.
"TRU Cool 24 Row Oil Cooler Kit w/ T-Stat + 10 Aeroquip 90 degree elbow
*Only installed & turned engine over. I discovered a leak with one of the 90 degree AN fittings, so I removed the entire system. I purchased this system a few weeks before Type R Expo 12 and ran out of time with ordering a new part or crush washer to fix the AN fitting.

-Tru Cool 24 Row Oil Cooler
-Mocal Sandwich Plate 20mm thread
-Mocal 1/2’ x -10 ORB fittings (2)
-Aeroquip Stainless Steel -10 Braided Hose *PM me for measurements
-Aeroquip Straight Male Connector -10 to 1/2’ (2)
-Aeroquip Straight Reusable Swivel Fitting -10 (2)
-Aeroquip 90 degree Elbow fitting -10 (2) *One needs replace, or try using the Earls."



Red metal valve stems from my K1s. SOLD.

Last edited by Egezzy; 09-06-2014 at 10:29 AM. Reason: Stems sold.
Old 09-06-2014, 10:28 AM
  #196  
Spongebrad Squarepants
iTrader: (2)
 
Egezzy's Avatar
 
Join Date: Feb 2004
Location: #BrapCity
Posts: 10,456
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Race Parts or Supplies

I am going with a full cage, so I need to unload the roll bar. It has SFI 45.1 padding on both sides. It is still in the car, so I don't have "good" pictures of it. I'm asking 530 picked up.





Stock photo. Non model specific.
Old 09-09-2014, 05:39 AM
  #197  
Trial User
 
1974jh5's Avatar
 
Join Date: Sep 2014
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Race Parts or Supplies

I'll take the transponder, please see PM's.
Old 09-22-2014, 04:01 PM
  #198  
Honda-Tech Member
iTrader: (6)
 
bigG's Avatar
 
Join Date: Sep 2004
Location: sunrise, FL, USA
Posts: 1,027
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Race Parts or Supplies

PWJDM spherical Bearing Rear LCa For Ek bnib $250
Energy suspension D16 Shifter Bushings & rack bushings with Hard race front lower control arm bushings $100
Attached Images  
Old 10-11-2014, 08:06 AM
  #199  
Honda-Tech Member
 
vbspec's Avatar
 
Join Date: Mar 2003
Location: Va Beach, VA, USA
Posts: 837
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Race Parts or Supplies

I'm selling my ITR 5 lug fitment StopTech big brake kit. Rotors have minor checking but can make another few events on them. Selling way cheaper than new. I'm not on the site much so hopefully chad won't take this down.
Here is a link to my eBay add:
http://m.ebay.com/itm/321549141062?nav=SELLING_ACTIVE
Selling them for $1,100 + $40 shipping
Thanx for looking
Old 10-17-2014, 08:30 PM
  #200  
Honda-Tech Member
iTrader: (1)
 
Lewy. Dee Ayy's Avatar
 
Join Date: Oct 2005
Location: Dont trip.
Posts: 3,818
Likes: 0
Received 0 Likes on 0 Posts
Default Re: FS: Race Parts or Supplies

PIC SELECT coilovers. For EF/DA with rear lower arms. Great shape. Never seen track abuse. Mostly highway miles. Never seen snow. Rarely saw rain. $800 or $850 shipped + PayPal fees. Located in Chicago.

Will fit EG/DC i believe just need front EF/DA forks.
Attached Images  


Quick Reply: FS: Race Parts or Supplies



All times are GMT -8. The time now is 12:25 AM.