Mahle GoldSeries on Stock H22A1 rods
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Feb 2007
Location: Cloverdale/San Diego, CA, Sonoma/Mira Mesa
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
Mahle GoldSeries on Stock H22A1 rods
I know I might know the answer
But I would like to verified with people have done it....
H22 Mahle GoldSeries pistons
Can you us them with stock Rods?....
I know stocks are press in and these mahle pistons use a
22mm High quality steel wrist pins
But I would like to verified with people have done it....
H22 Mahle GoldSeries pistons
Can you us them with stock Rods?....
I know stocks are press in and these mahle pistons use a
22mm High quality steel wrist pins
#2
Re: Mahle GoldSeries on Stock H22A1 rods
H22A1 rods would have to be modified with bushings like the H22A4 rods, but if you are already going to forged pistons, an upgraded rod would probably be a good idea at the same time.
Thread
Thread Starter
Forum
Replies
Last Post
fastludeh22
Honda Prelude
7
08-13-2002 07:00 AM