Anyone know what the specs on these wheels are??
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2008
Location: West Palm Beach, FL
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know what the specs on these wheels are??
In the market for wheels and I really like the way this car sits. Any idea what size/offset this is? Is the owner on here? maybe?
#2
Honda-Tech Member
Thread Starter
Join Date: Dec 2008
Location: West Palm Beach, FL
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone know what the specs on these wheels are??
230 views and no one has a clue? C'mon people guesses are acceptable too you're not being graded.
#3
Sanji
iTrader: (1)
Re: Anyone know what the specs on these wheels are??
Pageviews mean almost nothing these days, with all the sites out there that cache page data (like Google) using bots that take snapshots of pages. A rough estimate of ACTUAL humans seeing your page, would be roughly 15 - 20% of the noted number.
As for your request, those look to be 16x8 Schmidt TH-Lines. Offset, I'd ballpark in the mid-20's.
As for your request, those look to be 16x8 Schmidt TH-Lines. Offset, I'd ballpark in the mid-20's.
#6
Honda-Tech Member
Re: Anyone know what the specs on these wheels are??
the rears are different, it looks like a staggered setup.
like Matt said, prolly 16x8 +20 or close to that up front, and prolly 0 or negative offset out back.
like Matt said, prolly 16x8 +20 or close to that up front, and prolly 0 or negative offset out back.
#7
Re: Anyone know what the specs on these wheels are??
well if you are looking for the reps the brand is avid 1 av-03 15x7 35 offset put the link in the bottom good luck on your wheel purchase
https://www.google.com/webhp?sourcei...heels&tbm=shop
https://www.google.com/webhp?sourcei...heels&tbm=shop
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Dec 2008
Location: West Palm Beach, FL
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone know what the specs on these wheels are??
I agree they definetly look staggered... I looked up those avids and the +35 offset definetly looks more shallow than the rear, might be +35 up front but a better question is does anyone know what offset would put the wheel/tire wall flush with the face of the fender? Spacer numbers welcomed too
Thread
Thread Starter
Forum
Replies
Last Post
b20vtecturbe
Wheel and Tire
2
06-28-2011 06:29 AM
DisturbedK24
Wheel and Tire
1
06-04-2008 07:27 PM