innovative wide band D14 pin. need help.. msd cables to dizzy
#1
innovative wide band D14 pin. need help.. msd cables to dizzy
Ok im trying to wire up my wideband to my ecu or jumper harness and im looking for the D14 pin.. I have a p28 with jumper harness and its a 97 integra. Im a lil lost I tried looking really quick yesterday to see if I could figure it out but had some other things to do so I left... if anyone can help me I woukd appreciated. .
Also theres 2 cables that go to the distributor plug cables but im not sure which color goes with what color..
If anyone can help I would appretiated thanks again... and plz no smart asses these blogs are for people to help others not be sarcastic about things.
Also theres 2 cables that go to the distributor plug cables but im not sure which color goes with what color..
If anyone can help I would appretiated thanks again... and plz no smart asses these blogs are for people to help others not be sarcastic about things.
#2
Honda-Tech Member
Join Date: Oct 2013
Location: Miami, Fl
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Re: innovative wide band D14 pin. need help.. msd cables to dizzy
Put the brown or yellow wire from the innovate harness (assuming its an lc-2) into d14, and make sure you program the output of it so the ecu can read it right. Unless you go and do some extra stuff to the ecu it won't be able to read a 5v input, so change the max signal output to 3.5v.
Thread
Thread Starter
Forum
Replies
Last Post
1 Cam Wonder
Honda CRX / EF Civic (1988 - 1991)
19
10-10-2004 08:49 AM