JDM/EDM 1st Gen CRV Front Bumper
#79
Honda-Tech Member
iTrader: (3)
Join Date: Apr 2002
Location: got boost, michigan, usa
Posts: 1,548
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM/EDM 1st Gen CRV Front Bumper
http://www.ebay.com/itm/HONDA-CRV-FRONT-BUMPER-1995-2001-/360979278135?pt=Motors_Car_Truck_Parts_Accessories&hash=item540c0aa937&vxp=mtr
Hella deal here! Wish I had the extra cash!
Hella deal here! Wish I had the extra cash!
#80
Honda-Tech Member
Re: JDM/EDM 1st Gen CRV Front Bumper
only problem with the EDM ones are they have holes in the top for the headlight washer nozzles. i guess if you fiberglassed them closed then there wouldn't be an issue
#87
#88
Honda-Tech Member
Join Date: Feb 2006
Location: somewhere rockin out, pa, us
Posts: 1,927
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM/EDM 1st Gen CRV Front Bumper
Hey guys i just got a 01 red 5 speed cr-v last week! Its only got 95k miles on it and runs good. I just moved to the next town over into a new house and what do you know it...my neighbor that lives across the street from me owns a red first gen cr-v too!!! But anyway, i'm looking to get a jdm front bumper. pm me if ya got one!
#91
Re: JDM/EDM 1st Gen CRV Front Bumper
Hey guys i just got a 01 red 5 speed cr-v last week! Its only got 95k miles on it and runs good. I just moved to the next town over into a new house and what do you know it...my neighbor that lives across the street from me owns a red first gen cr-v too!!! But anyway, i'm looking to get a jdm front bumper. pm me if ya got one!
PM HERE!!! and I'll try and get back to you asap with pics!
Edit: btw it is in perfect condition!!
#92
Re: JDM/EDM 1st Gen CRV Front Bumper
Here's some high res pics - keep in mind I already painted this so it's the proper gray for my CRV...
In this one you can see that one of my vertical fins isn't exactly vertical...
You can see the sloppy casting removal around one of the fins here. I thought I cleaned them all up with a razor blade, but I must have missed this one. Areas like this around finer details were pretty common...
Another are where you cash see some rough edges... Typically on the OE stuff this isn't common. You can see in the bottom open area some edges that are kinda sharp, and the in the upper open area some cuts that aren't the straightest.
I took this pic in hopes that it would give you guys some idea as to what type of plastic the bumper is made of. If you've ever dealt with molded plastic parts before, this should look fairly familiar. This is the back side of the bumper by the way. The outside didn't have any of those ugly casting marks or texture variances. Just an FI - there's also no "HONDA" logo stamp on this bumper like the one posted earlier in this thread.
All of the little nit-picks aside, once the bumper is cleaned up and painted, it looks nice. I'm not going to complain at all, still well worth the money to me. I just wish my stupid fog lights would get here so I could put it on. haha
In this one you can see that one of my vertical fins isn't exactly vertical...
You can see the sloppy casting removal around one of the fins here. I thought I cleaned them all up with a razor blade, but I must have missed this one. Areas like this around finer details were pretty common...
Another are where you cash see some rough edges... Typically on the OE stuff this isn't common. You can see in the bottom open area some edges that are kinda sharp, and the in the upper open area some cuts that aren't the straightest.
I took this pic in hopes that it would give you guys some idea as to what type of plastic the bumper is made of. If you've ever dealt with molded plastic parts before, this should look fairly familiar. This is the back side of the bumper by the way. The outside didn't have any of those ugly casting marks or texture variances. Just an FI - there's also no "HONDA" logo stamp on this bumper like the one posted earlier in this thread.
All of the little nit-picks aside, once the bumper is cleaned up and painted, it looks nice. I'm not going to complain at all, still well worth the money to me. I just wish my stupid fog lights would get here so I could put it on. haha
#97
Re: JDM/EDM 1st Gen CRV Front Bumper
I have a EDM/JDM Bumper for sale!! Got it from the dealership so it's a legit one. if you or anyone on here is intersted let me know. Trying to get rid of it soon since i dont have a CRV anymore. The guy at the dealership told me it was one of the last ones available to buy in the US. Make me an offer. Available for pick up if you are in Los Angeles, CA Area. If not I can ship it.
PM HERE!!! and I'll try and get back to you asap with pics!
Edit: btw it is in perfect condition!!
PM HERE!!! and I'll try and get back to you asap with pics!
Edit: btw it is in perfect condition!!
Thread
Thread Starter
Forum
Replies
Last Post
soninihon
Honda CR-V & Element
25
01-02-2020 08:22 PM
DA_teg04
Honda Minivans, Crossovers, and Trucks
1
09-19-2006 11:25 AM
dai
Honda Accord (1990 - 2002)
29
03-24-2005 07:02 AM