phantom_bcw84

well the painter send me pics of the bay painted didn't expect that today.

phantom_bcw84

Here is some before and after pics i did real fast

90 JDM EF8

iTrader: (1)

Bay looks good!

phaphon

Bay looks good this motivates me to do mines . Got my exterior done though.

XRacerX

iTrader: (3)

Looking good sir!!!

phantom_bcw84

I weighed the car on the way home from the body shop and its at 1300 lbs right now

sirealz

Subscribed...can't wait to see how it turns out.

phaphon

Nice. What model is the hatch ? And should be around 2k when done with you in it?

phantom_bcw84

its a 1993 honda civic DX. that would be awesome if it weighed 2k with me in it.

tonight i will be doing the rear disc conversion on the civic and hoping to pull the subframe out this weekend to paint it and clean it up then put it back in. then when that is done i should be able to start swapping parts over from the integra.

93ericSi

Subscribed. Car is looking great!

phantom_bcw84

here is a pic of the passenger side. i still have to clean a lot of the underside but didn't have time this weekend.

before



after

Danger

nice work, looks good.

phantom_bcw84

Ok i started working on the brake line tuck again and got the prop valve mounted and started making some lines. (very stressful and time consuming). hoping to get the rest done soon but i need to get a few more ends first (some came up missing)

guy_from_nerk

Looks good, i would hit the backside of those welds with some primer or something to prevent them from rusting

phantom_bcw84

thanks that is a good idea i will have to do that.

$MIKE$

iTrader: (13)

Wow that looks like a lot of work

phantom_bcw84

So i got some more work done on the civic.

here is the subframe before




here is the bay without the subframe




The whole assemble




and here is the after still got a few things to paint but will be doing that tomorrow

$MIKE$

iTrader: (13)

What are your plans for motor?

phantom_bcw84

i have a fully built laskey race motor that is in my integra that i will be putting in the hatch if the motor doesn't sell to my buddy

juackko

Man I want to keep track of your project. I have a 92 eg with an intrega motor too but the body is in a pretty rough shape, the interior as well. I'm planning on fixing it completely and you have motivated me much more! Pls keep uploading more pictures of your work!!

phantom_bcw84

Got a little work on the hatch this weekend. My best friend and i painted the fender wells black cuz they looked like absolute crap. Also a friend traded me tokico shocks with H&R lowering springs for my stock suspension so i said why not haha.

cleaned them up as best as i could and painted the front forks. here are pics of the rear ones installed and everything back together.

phantom_bcw84

Ok got a little more work done on the civic. got the front end back together and made the front brake lines

Here is the drivers side brake line



and drivers side showing the H&R lowering springs and tokico struts



Passenger side brake line



same as drivers side



Just another pic of the engine bay



and a random pic of how it looks with the lowering springs

phantom_bcw84

Well i finally got some work done on the civic. been putting it off because i started parting out my integra that i used to drag race so this is no longer being finished.

Once i am done with the brake line tuck i will be putting all the drag race parts that i have left over and put the car up for sale.


I made the top two lines and the one going to the drivers side





Here is the drivers side line with the clutch pedal all the way down



Also made this line that goes down to the brass T




I ran out of brake line but bought some this morning and tomorrow night i will be working on it again and trying to get the rest of the lines done and get the stagging brake installed and tighten all the brake lines and start bleeding and checking for leaks

phantom_bcw84

Got more done on the brake line tuck. i might change a few lines that is between the staging brake and the rear lines. might turn the T to run with the center console to make the lines closer to the center console.

Onto some pics

phantom_bcw84

Also the green lines looked like crap against the blue of the engine bay so i took some test brake line and scuffed it up with a scotch bright pad and painted it. That came out pretty good so i took the plunge and did it to the lines to the master cylinder


Before



After