ISC N1 Coilovers
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2012
Location: WI
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
ISC N1 Coilovers
Hi everyone, in my search for a real suspension to replace my tein s-techs and stock struts I stumbled on these... Let me start with the fact that I am not looking to slam the car, just a little under a 2 finger gap on all four corners. They seem reasonably well made and get good reviews on other brands of cars. my question is if the spring rates of 10k front an 12k rear would be appropriate for daily driving and a few auto cross events, here's the link
http://www.redline360.com/isc-coilov...-si-ep3-H006-S
I really like them because they are rebuild-able, they aren't horribly expensive to rebuild and even though the pics don't show it. I believe they have camber plates.
Let me know what you think.
Thanks, Tim
http://www.redline360.com/isc-coilov...-si-ep3-H006-S
I really like them because they are rebuild-able, they aren't horribly expensive to rebuild and even though the pics don't show it. I believe they have camber plates.
Let me know what you think.
Thanks, Tim
#2
Re: ISC N1 Coilovers
I've never heard of them nor tried them but they seem to be pretty good on paper. I think for DD and minor autocross events they would hold up just fine.
#3
Honda-Tech Member
Thread Starter
Join Date: Sep 2012
Location: WI
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Re: ISC N1 Coilovers
Never heard of them either but it looks like the Subaru guys really like them for auto cross, and I haven't seen any of them blow a strut yet. Thanks for the reply about the spring rates
Thread
Thread Starter
Forum
Replies
Last Post